Separable Connectors

Crimping Tools & Die Sets For Aluminium Crimp Connectors – DIN Standard

Crimping Tools | Die Sets | DIN Standard

• uploaded by Chris Dodds - Thorne & Derrick Sales & Marketing Manager

The following information is provided to enable to selection and use of the correct crimping tools and die sets according to DIN Standard when installing Nexans Euromold type separable connectors – these cable connectors are used to terminate MV-HV cables into switchgear, transformers and medium/high voltage electrical equipment.

Specifically, the DIN Standard selection table below covers the connection, termination and crimping of aluminium conductor cables.

Please note when crimping aluminium cables:

* Uncompacted and compacted conductors

** Rotate each successive crimp 90 Degrees and remove flashes resulting from crimping.See the following image for crimp sequences.

DIN Standard Hexagonal Crimping Dies

Thorne & Derrick distribute Cembre tools to enable the crimping of all types of copper or aluminium conductor cables in hexagonal or nest-indent formation.

DIN stANDARD

DIN, Deutsches Institut für Normung e.V. (German Institute for Standardization) develops standards for rationalisation, quality assurance, environmental protection, safety and communication in industry, technology, science as well as the public domain.

More Reading  ➡

Cable Lugs & Crimping Tools – The DIN Standard 48083

THORNE & DERRICK SPECIALIST ELECTRICAL DISTRIBUTOR

LV ♦ MV ♦ HV

T&D distribute the most extensive range of LV, MV & HV Cable Jointing, Terminating, Cable Pulling & Installation Equipment – we service UK and international clients working on underground cables, overhead lines, substations and electrical construction at LV, 11kV, 33kV and EHV transmission and distribution voltages.

• Key Products: MV-HV Cable Joints & Terminations, Cable Cleats, Duct Seals, Cable Transits, Underground Cable Protection, Cable Jointing Tools, Feeder Pillars, Cable Ducting, Earthing & Lightning Protection, Electrical Safety, Cable Glands, Arc Flash Clothing & Fusegear.

• Distributors for: 3M, ABB, Alroc, Band-It, Catu, Cembre, Centriforce, CMP, Elastimold, Ellis Patents, Emtelle, Furse, Lucy Zodion, Nexans Euromold, Pfisterer, Polypipe, Prysmian, Roxtec.

LV – Low Voltage Cable Joints, Glands, Cleats, Lugs & Accessories (1000 Volts)

MV HV – Medium & High Voltage Cable Joints, Terminations & Connectors (11kV 33kV EHV)

Cable Laying – Underground Cable Covers, Ducting, Seals & Cable Pulling Equipment

T&D, CATU Electrical Safety & Arc Flash Protection Specialists for SAP’s, Linesmen, Jointers & Electrical Engineers – Largest UK Stockist

Euromold 200 Series Connectors | Interface A Bushings | Nexans Euromold

Euromold 200 Series Connectors | MV HV

➡ To view the complete range of Euromold 200 Series Connectors and medium/high voltage cable accessories for use with Interface A Bushings please see below.

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

LV Cable Accessories

T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.

CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories

Euromold 400 Series Connectors | Interface B Bushings | Nexans Euromold

Euromold 400 Series Connectors | MV HV

➡ To view the complete range of Euromold 400 Series Connectors and medium/high voltage cable accessories for use with Interface B Bushings please see below.

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

LV Cable Accessories

T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.

CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories

Euromold 600 Series Connectors Symmetrical | Interface C Bushings | Nexans Euromold

Euromold 600 Series Connectors | MV HV

➡ To view the complete range of Euromold 600 Series Connectors and medium/high voltage cable accessories for use with Interface C Bushings please see below.

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

LV Cable Accessories

T&D stock and supply cable accessories to Cable Cleat, Gland, Joint & Terminate armoured/unarmoured multicore (SWA) or single core (AWA) power cables into low and high voltage substations – the LV cable installation accessories support electricity distribution to main distribution switchgear, sub-distribution boards and transformers.

CMP Glands | 3M Joints | Cembre Lugs | Ellis Cleats | LV Cable Accessories

Euromold 600 Series Connectors Compact | Interface C Bushings | Nexans Euromold

Euromold 600 Series Connectors | MV HV

➡ To view the complete range of Euromold 600 Series Connectors and medium/high voltage cable accessories for use with Interface C Bushings please see below.

THORNE & DERRICK Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV