|
|
Cable Labelling Solutions
Silver Fox are the leading UK manufacturer of cable labels and also the world’s most advanced labelling system for wires and cables, their Fox-In-A-Box.
Thorne & Derrick are Main Distributors for Silver Fox and can provide expert technical recommendations, installer training and competitive product supply from stock for cable labels to suit LV MV HV power, telecom, data, signal, network and fibre optic cables.
Labelling Features & Benefits
High specification and rigorously tested labels with high resistances to salt mist spray, heat, flame, chemicals, gases (H2S) and UV for onshore and offshore environments – with fire safety testing and certification to BS 6853 for Toxic Fume and Smoke Density Emission to suit LSZH zero halogen applications.
Productivity - 25,000 cable labels printed in 4 hours
Versatility - 11 types of cable and equipment labels with Fox-in-a-Box
Durability - 8000 hours accelerated UV age-tested for permanent labelling
Simplicity - Quick + easy to install – “TIP - turn time into profit”
|
|
-
LSZH Smoke, Toxic Fumes & Oxygen Index Tested
-
Network Rail Approved
-
London Underground Approved
-
Low Temp -40°C 1000 Hours
-
High Temp 70°C 1000 Hours
-
Chemical | Solvent Resistant
-
H2S Sour Gas Exposure
-
UV Weathering
REQUEST
DEMONSTRATION
|
|
|
|
BLOG Today’s world of modern, intelligent and complex buildings demands the highest safety performance from their electrical cables and cable accessories including cable labels.......MORE
|
|
|
BLOG Whether onshore or offshore, the oil and gas industry is exposed to the severe challenges of maintaining safe working practices in potentially explosive atmospheres or hazardous areas.....MORE.
|
|
|
BLOG Key to the selection process for rail cable labels is the ability to demonstrate low smoke zero halogen performance in the event of a fire....MORE.
|
|
|
Very high Oxygen Index levels
8000 hours successful NDT accelerated UV ageing
Silver Fox
Fox-Flo Tie-On Cable Labels
Used throughout the rail industry for the effective and permanent labelling of power, S&T and data cables including sub-surface applications where...MORE.
|
|
|
Cable Jointers Blog LV MV HV EHV
|
|
|
Thorne & Derrick supply 3M Electrical, Prysmian, Filoform and SPS low voltage cable joints suitable for connecting and jointing single and multi-core/pair power, control and instrumentation cables up to 600/1000V (3.3kV) in industrial and hazardous area
locations.
Specialist applications include fire resistant, low smoke zero halogen, hydrocarbon resistant and utility cable joints utilising Cold Shrink or Scotchcast resins.
|
|
|
|
|
|
|
Cable cutting tools to suit LV-HV cables with copper or aluminium conductors, steel wire armoured (SWA) / braided cables with lead sheath and insulation types including XLPE, EPR and paper types – commonly used to cut armoured LV cables and medium/high voltage power cables 11kV-33kV, single and 3 core type.
Cable crimping tools using hydraulic or battery operated to crimp conductors 1.5sqmm-1000sqmm suit aluminium and copper conductors with sector shaped, stranded or solid cores.
|
|
|
Cable jointing tools for stripping and preparing low, medium and high voltage power cables including 11kV, 33kV, 66kV and 132kV-400kV polymeric cables with XLPE or EPR insulation and bonded/peelable semi-conductive cable screens.
T&D distribute Cable Jointing Tools from leading manufacturers including Alroc, Ripley, Boddingtons and Hivotec for all types of LV, MV or HV cable stripping, preparation and jointing requirements – insulated tools are available for live-working on low voltage cables, joints and electrical equipment up to 1,000v.
|
|
|
Cable protection covers, tile tapes and underground warning tapes are installed over LV, MV and HV power cables in trench and ducted cable installations with high visibility colour providing a visual warning of danger when excavating cables.
11kV and 33kV cable protection tapes (Tapetile and Stokbord covers) are manufactured from heavy duty plastic for reliable protection.
Underground protective covers are used to provide a clear and effective visual warning to the presence of LV-HV underground cables, cable duct or high voltage cable joints.
BLOG : Tape Tile & Stokbord Cable Protection Covers For MV HV Power Cables
|
|
|
|
T&D distribute proven cable duct sealing products from leading manufacturers CSD Sealing Systems and Filoform with widespread utility approvals and industry acceptance as trusted alternatives to traditional “sticky and tricky” to install mastic seals or regulation violating expanding foams.
REQUEST DEMONSTRATION
|
|
|
Cable Transits manufactured by Roxtec to provide effective sealing of single and multiple low and high voltage cables and ducts against constant water pressure, fire spread and gas migration.
Extensively specified in the Utility Power, Transmission & Distribution sectors for sealing cable ducts and protecting 11kV/33kV medium/high voltage substations against flood risk.
|
|
|
|
T&D supply both standard and bespoke feeder pillars in a selection of materials, paint finishes and dimensions to meet all indoor and exterior power distribution, control and lighting requirements up to 1,000 volts with IP65 door seal – this includes LV substation and network pillars with DNO supply cut-outs for utility applications.
|
|
|
|
|
In this BLOG we discuss to processes and Furse products used for the Earthing of electricity substations with site installation photographs from an EHV 275kV substation earthing project.
|
|
|
Utility Showcase
|
|
|
|
BASEC are collaborating on knowledge and content sharing with Thorne & Derrick.
With a shared passion and ambition to enhance LV MV HV electrical safety by the education of industry stakeholders to specify and buy accredited, tested and certified Quality Cables & Cable Accessories.
|
|
|
The following article has been republished with kind permission of Martha Davis (Senior Director of Content – T&D World and Utility Analytics Institute) from Transmission & Distribution World and their video sponsor Burns & McDonnell.
The 5 Videos videos are real-life and shot-on-site, showing transmission and distribution crews and splicers at work.
|
|
Special Guest Feature
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|