TOOLS | Watch FREE Online Demo's | 600V to 66kV
No images? Click here
LV HV CABLE TOOLS
When correctly selected and used, specialised Cable Preparation & Installation Tools can prevent much of the human error identified in the field as a cause of LV HV Cable Accessory failure.
This can enable Cable Systems to last well beyond the 30 year limit that many consider to be a cables expected life cycle.
Invest in the correct tools, get trained in their use and use them.
Thorne & Derrick hold the largest UK Stocks of Cable Preparation, Spiking, Crimping & Cutting Tools from market-leading manufacturers including Alroc, Cembre, Klauke, PENTA, Ripley & Vicera.
Ripley US15-7010 PRO
Cable Sheath Stripping Tool
Used to remove the outer sheath to prepare cable for the installation of MV HV joints, terminations or connectors.
Compatible with: XLPE, PE, PVC, LLPE, PUR and rubber type sheathed cable jackets (10-60mm dia's).
Safe, Fast, Precise - no open blades.
Ripley US02-7000
Bonded Semicon Shaving Tool
Used by MV HV Jointers to remove the semi-con screen.
Enables the Jointer to easily remove the bonded semi-conductor from MV & HV Cables with a chamfer on the transition, leaving a very smooth finish over the XLPE insulation.
Ripley US02 MAX (UP TO 80mm DIAMETER)
US02 MAX | shown here in use on the high voltage cable preparation of 66kV/72kV 1200sqmm single core cable; XLPE insulation with bonded semicon screen – minimal polishing and chamfering required with a clean and precise transition.
Insulation & Sheath Stripping Tool
Multi-Function tool used by MV HV Jointers to remove the insulation with a straight and neat cut and also strip outer sheath (PE-PVC-PR).
JOINTING TOOL SETS
Wind | DNO | Rail
Thorne & Derrick stock and design customised MV Jointers Tool Kits to provide the specialist tools needed to prepare Inter Array Cables up to 33kV & 66kV prior to the installation of joints, terminations or connectors
Custom tool sets are also available for the Preparation of UK DNO LV/11kV/33kV and Network Rail 25kV cables.
Nexans EXPERT HV Jointers Tool Kit - more info
CUT & CRIMP CABLES
Battery Powered Cutting Tool
Cut SWA Cable up to 105mm Dia
Klauke ESG105 is a battery powered cable cutting tool that has a maximum diameter range for cutting cables up to 105mm.
- Innovative opening mechanism
- Large cutting range - remote option
- Lightweight and portable
Battery Powered Crimping Tool
Crimp Cable up to 630sqmm
The Klauke EK135FT is a battery powered cable crimping tool with a crimping range for cable lugs and connectors up to 630sqmm – with a very powerful cable crimping force of 13.5 t.
- Closed head, rotatable
- Simple and safe to use
HV | XLPE & BONDED SCREEN REMOVAL TOOLS
Alroc CAMF5/55-160-BBCF allows the Jointer to chamfer, groove and remove XLPE insulation and bonded semicon from 66kV, 132kV & 275kV HV cables (55-160mm dia's).
VIDEO LIBRARY
15 Video Demonstrations | LV to EHV Cable Preparation
From STOCK we have the most extensive range of Preparation Tools to remove bonded/peelable screens, XLPE/EPR insulation and strip sheaths including PE, PVC, LLPE, PUR and rubber type cables.
SPIKE LV HV CABLES UP TO 140MM DIAMETER | SWA
Hydraulic & Remote | Spike Armoured Cables up to 140mm Diameter
The PICOUP 400 is a 2 in 1 hydraulic Spiking & Cutting Tool used to check for and ensure the absence of voltage on LV MV HV underground and subsea power cables operating at 600V, 11kV, 33kV, 66kV and 132kV.
HV CABLE STANDS
Stable Cables For MV HV Jointing & Termination
Easy, Ergonomic & Efficient - Vicera APU2.0 is a HV Jointing Stand used to support cables in the trench, training centre or substation with a wide range of clamp adjustment options to provide stability for Jointers when preparing cables.
Approved by & Used by Nexans | Ensto | Prysmian | NKT | TE Tyco | PFISTERER
CABLE SANDING TOOLS
Reduce Repetitive Strain & Improve Cable Preparation Processes
Faster, smoother and consistent excellence in cable finish and workmanship standards for the HV Jointer using the Vicera CSRT-M cable sanding tool up to 80mm - 130mm option available for both XLPE & EPR insulation.
CABLE ACCESSORY STOCKISTS UP TO 66KV
Joints | Terminations | Connectors
CABLE TERMINATION, JOINTING, PULL-IN & ELECTRICAL EQPT UP TO 66KV
Thorne & Derrick are specialist distributors of LV, MV & HV Cable Installation, Jointing, Earthing, Substation & Electrical Eqpt – servicing UK and global businesses involved in cable installations, jointing, substation, overhead line and electrical construction at LV, 11kV, 33kV and EHV.
We supply the Power Transmission & Distribution industry in the onshore and offshore wind, solar, rail, oil/gas, data centre, battery storage and utility sectors.
Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Clothing & Protection | Cable Jointing Tools | Cable Pulling & Laying | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV | Cable Transits | Fuses MV HV | Cold Shrink
Since 1985, T&D have provided an outstanding service to UK and export customers – we are highly customer responsive and absolutely committed to providing a world-class service. We offer 100,000+ products from 100+ manufacturers - a multi-million pound stock holding provides complete global supply solutions.
