|
|
 |
|
Reliability & Safety at Reduced Cost
A modern generation of MV Heat Shrink Joint has been developed by Nexans for the UK utility and contracting industry.
Independent Connection Providers (ICPs) and Power Contractors now have a credible option to ensure they obtain the most competitive prices for 11kV and 33kV Joints & Terminations without compromising quality - try us with your next enquiry.
Thorne & Derrick have an International Distribution Agreement with Nexans Power Accessories UK and are their main stockists and suppliers for their range of Heat Shrink Joints & Terminations up to 33kV.
|
|
|
|
JTS cable joints provide the most cost-competitive option to power contractors.The cable joints, manufactured by Nexans, are tested in accordance to CENELEC HD629.1.
The internationally recognised quality standard ensures power system reliability and outage reductions when installed in accordance with the manufacturers instructions by Competent cable jointers.
|
|
|
The Triple Wall design of the JTS Joint reduces installation times with corresponding labour savings.
The triple extruded heat shrink tube with integrated stress control provides compact installation with reduced components and excellent water sealing for direct burial into underground cable trench.
Mechanical connectors are included for fast jointing of conductors without resort to hydraulic crimping tools and associated die sets.
|
|
|
2021 PRICE LIST
Nexans heat shrink joints and terminations are increasingly preferred and adopted by NERS Accredited Independent Connection Providers (ICPs), Cable Jointing & Power Contractors working in the renewable energy, rail, utility and construction industries.
PRICE LIST | 11kV 33kV Cable Joints & Terminations
|
|
|
|
11kV 33kV 66kV
|
|
Nexans Cable Accessories are in extensive service throughout the UK DNO power grid – the Euromold brand of separable connectors are approved by several DNO/IDNO operators dependent on the product, voltage and network.
Nexans joints and terminations are increasingly preferred and adopted by NERS Accredited Independent Connection Providers (ICPs) working on 11kV private networks.
Thorne & Derrick have an International Distribution Agreement with Nexans Power Accessories UK and are their main stockists and suppliers for their range of Heat Shrink Joints & Terminations up to 33kV.
Contact us for Quotation.
|
|
|
The Difference Is Material - EPDM
EPDM rubber performance levels excel in electrical strength and resistance to environmental conditions compared to competitor connector materials, such as silicone.
Compliant to CENELEC HD 629.1 S2 and approved by all UK DNO's - no service life issues or product breakdowns for converter-based applications in onshore/offshore windfarm and solar power projects.
Press Release
Nexans Euromold Screened Separable Connectors | Approval for Supply Within SSE’s Networks Business
|
|
|
The Nexans Euromold range of Connectors & Bushings have now received Full Acceptance by Network Rail with Official PADS Approval.
Specifically this includes Nexans Tee Connector model QM909TB Interface F and associated equipment Bushing QM909AR.
Thorne & Derrick are currently supplying this range of transformer terminations to several UK rail projects – we are Approved Vendors to Network Rail, CP6 Framework Delivery Partners and several HS2 Joint Ventures working on rail transport projects.
|
|
|
|
|
"I woke recently and toyed with the idea of career change. One Costa later I just went for it.
So I Google searched 'cable jointer training'.
I booked that 4 day course, turned up, collected my certificate – I am now a Cable Jointer.
With paperwork to prove it.
Easy-peasy.
OK, this is a personal fiction but a common occurrence in the UK jobs market."
Contact us to discuss your Cable Jointer Training requirements.
|
|
|
Nexans Cable Jointers Tool Sets Contain:
-
Adjustable Cable Stripper
-
Quick-Clamp
-
Semi-con Shaving Tool
-
Semi-con Scoring Tool
-
Insulation Chamfering Tool
Largest UK Stocks of Jointing Tools for LV up to 132kV
|
|
|
Pictured: 130kV Ericsson (NKT) Transition Cable Joint (EHV)
Image Courtesy of: Fredrik Pedersen – Installation Technician at Scandinavia Power Crew
NKT Cables
-
Self-supporting outdoor cable terminations, porcelain or composite
-
Non-self-supporting outdoor cable terminations, silicone
-
Cable terminations for gas-insulated switchgears (GIS)
-
Transformer terminations
|
|
|
Date: 2002
Location: New Orleans USA
Jointing by: Campbell White Power Solutions
This project for New Orleans and Wilson Construction involved a 2500sqmm enamel stranded conductor work that required a rare skill set. Each stranded conductor has to be individually bead blasted and prepped for jointing - the cable circuit spanned the Mississippi River and was one of the few power components that survived Hurricane Katrina.
Campbell White are called upon globally for critical installs and repairs.
Images: Michael White.
|
|
|
Cable Manufacturer: Okonite
Jointing by: Campbell White Power Solutions (Mark Chillman, Eric Barnes, Tim Gwennell).
The Thorne & Derrick POWER Blog features contributions from our social network of utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
|
|
|
Following a 12 month Supplier Performance Assessment and the successful completion of several UK, European and US projects, Thorne & Derrick International are delighted to announce that we have been accredited with Approved & Verified Supplier Status to GE Renewable Energy.
Our recent projects include the supply off Earthing, Discharging & Substation Safety Equipment to the Terna 320kV HVDC Italy-France Connector project and a 33kV Cable Accessories package to Block Island USA Offshore Wind Farm.
|
|
|
|
|
Thorne & Derrick supply 3M Electrical, Prysmian, Filoform and SPS low voltage cable joints suitable for connecting and jointing single and multi-core/pair power, control and instrumentation cables up to 600/1000V (3.3kV) in industrial and hazardous area
locations.
Specialist applications include fire resistant, low smoke zero halogen, hydrocarbon resistant and utility cable joints utilising Cold Shrink or Scotchcast resins.
|
|
|
|
|
|
|
|
|
|
|
Cable cutting tools to suit LV-HV cables with copper or aluminium conductors, steel wire armoured (SWA) / braided cables with lead sheath and insulation types including XLPE, EPR and paper types – commonly used to cut armoured LV cables and medium/high voltage power cables 11kV-33kV, single and 3 core type.
Cable crimping tools using hydraulic or battery operated to crimp conductors 1.5sqmm-1000sqmm suit aluminium and copper conductors with sector shaped, stranded or solid cores.
|
|
|
Cable jointing tools for stripping and preparing low, medium and high voltage power cables including 11kV, 33kV, 66kV and 132kV-400kV polymeric cables with XLPE or EPR insulation and bonded/peelable semi-conductive cable screens.
T&D distribute Cable Jointing Tools from leading manufacturers including Alroc, Ripley, Boddingtons and Hivotec for all types of LV, MV or HV cable stripping, preparation and jointing requirements – insulated tools are available for live-working on low voltage cables, joints and electrical equipment up to 1,000v.
|
|
|
Cable protection covers, tile tapes and underground warning tapes are installed over LV, MV and HV power cables in trench and ducted cable installations with high visibility colour providing a visual warning of danger when excavating cables.
11kV and 33kV cable protection tapes (Tapetile and Stokbord covers) are manufactured from heavy duty plastic for reliable protection.
Underground protective covers are used to provide a clear and effective visual warning to the presence of LV-HV underground cables, cable duct or high voltage cable joints.
BLOG : Tape Tile & Stokbord Cable Protection Covers For MV HV Power Cables
|
|
|
|
|
Cable Transits manufactured by Roxtec to provide effective sealing of single and multiple low and high voltage cables and ducts against constant water pressure, fire spread and gas migration.
Extensively specified in the Utility Power, Transmission & Distribution sectors for sealing cable ducts and protecting 11kV/33kV medium/high voltage substations against flood risk.
|
|
|
|
|
T&D supply both standard and bespoke feeder pillars in a selection of materials, paint finishes and dimensions to meet all indoor and exterior power distribution, control and lighting requirements up to 1,000 volts with IP65 door seal – this includes LV substation and network pillars with DNO supply cut-outs for utility applications.
|
|
|
|
|
In this BLOG we discuss to processes and Furse products used for the Earthing of electricity substations with site installation photographs from an EHV 275kV substation earthing project.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
