Arc Flash Coverall Category 2 9.5 Cal

Arc Flash Coverall Category 2 9.5 Cal

Arc Flash Coverall Category 2 9.5 Cal

Arc Flash Clothing

Category 2 Coverall By ProGARM 

ProGARM Arc Flash Coverall provides Category 2 protection against arc flash with 9.5cal/cm2 according to IEC 61482-1-1:2009 ‘open arc’ test method.

Should you require guidance on selection and use of an Arc Flash Calculator please call Thorne & Derrick, the UK’s leading specialist distributor of electrical safety equipment for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage).

Coverall sizes range from S-4XL, REG LEG (31”/80cm) and M-2XL TALL LEG (33”/85cm)

The best selling coverall features reflective tape and lightweight VXS+ Flame Resistant fabric. Available in navy and orange.

Arc Flash Protection

  • IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – 9.5cal/cm2
  • IEC 61482-1-2:2009 Box Test Method Class 1 or Class 2 – Class 1 4kA

Arc Flash coverall Category 2

Features & Benefits

  • Category 2 Arc Flash Protection
  • Mandarin collar – maximum neck protection
  • Kneepad pockets – wear with kneepads for extra comfort
  • Chest Pockets with zippers – secure storage
  • Gas monitor loop – secure fixing point
  • SafetyICONTM on arm – visual EN Standards icon system
  • 5cm FR AS Reflective Tape – double stitched for longer life
  • Phone Pocket on sleeve with flap – safe and secure
  • Velcro® secured cuff tabs – close fit around wrist or gloves
  • Side access pockets  – with entry inside coverall
  • ThermSAFETM plastic Flame Resistant zippers – CE Certified
  • Internal elastic 2Point adjustable waistband – ensures close fit
  • Triple stitched side seams – Lifetime quality assurance
  • Easy-StretchTM side panels – maximum wear comfort
  • Action back for improved comfort

➡ See full range of Arc Flash Clothing, PPE & Protection Garments 

Arc Flash Coverall Category 2 9.5 Cal

Arc Coverall | Order Code ProGARM 6100

European Standards

ProGARM 6100 arc flash coverall conform to the following European Standards:

  • EN ISO 11611: 2015 | Class 1 | A1
    EN ISO 11612: 2015 | A1 | B1 | C1 | F1
    EN 1149-5:2008 | Pt. 5:2008 | Pt. 3:2004 | Charge Decay
    IEC 61482-2:2009 | Class 1 | EBT50 = 9.5cal/cm² | ARC 2

Coverall | Care Information

ProGARM 6100 coveralls must be carefully cleaned to ensure arc flash protection levels are maintained.

  • Do not bleach, boil or use soap based products – clean polo shirts using detergents only
  • Dirty clothing may lead to reduction in arc flash protection
  • Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
  • Always store arc flash clothing in clean dry conditions
  • Do not store in places subject to direct strong sunlight

Arc Flash coverall Size Chart

UK38″S40″S42″S 43″S44″S46″S48″S50″S52″S54″S56″S58″S60″S
CHEST TO FIT (INCHES)                                        36-3838-4040-4242-4343-4444-4646-4848-5050-5252-5454-5656-5858-60
CHEST TO FIT (CMS)90-9595-100100-105105-107.5107.5-110110-115115-120120-125125-130130-135135-140140-145145-150
 INSIDE LEG TO FIT (INCHES)                                     29.529.529.529.529.529.529.529.529.529.529.529.529.5
INSIDE LEG TO FIT (CMS)75757575757575757575757575

Related Arc Flash Clothing Protection & Products​


Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV).

NFPA 70E Arc Flash Clothing

NFPA 70E outlines the requirements for safe work practices to protect personnel by reducing exposure to workplace electrical hazards.

The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2009.

ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ARC 4 40 Cal 

IEC Standard 61482 – Class 1

Garment Category – Coverall

Order Code – ProGARM 6100

  • Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
  • Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame

Arc Flash Category 2 Coverall 9.5 Cal

arc flash protection product range

Electrical PPE Products | Gloves | Arc Flash Clothing | Arc Suits | Coveralls | Helmets & Visors

Arc Flash

Safety Wear & Arc Flash Protection | Thorne & Derrick understand how critical it is to have reliable, highest quality personal protection equipment (PPE), clothing and workwear available from stock at competitive prices – protecting utility workers against arc flash dangers posed during maintenance on underground electric cables, overhead line conductors or electrical equipment.

Data Sheets