Arc Flash Jacket 23 Cal Hi Vis Yellow

Arc Flash Jacket 23 Cal Hi Vis Yellow

Arc Flash Jacket 23 Cal Hi Vis Yellow


Category 2 Jacket By ProGARM

ProGARM Arc Flash Jacket is tested to achieve Category 2 against arc flash with 23cal/cm² according to IEC 61482-1-1:2009 ‘open arc’ test method and class 3 hi vis.

Should you require guidance on selection and use of an Arc Flash Calculator please call Thorne & Derrick, the UK’s leading specialist distributor of electrical safety equipment for LV (Low Voltage), MV (Medium Voltage) and HV (High Voltage).

The arc flash jacket is available in sizes ranging from S-4XL.

The softshell jacket is a modern and comfortable jacket due to its unique Flame Resistant fabric blend, and close fit design. Laminated outer layer to offer showerproof protection, and microfleece inner layer to offer comfort.

Arc Flash Protection

  • IEC 61482-1-1:2009 Open Arc Test Method Cal Rating – 23cal/cm²
  • IEC 61482-1-2:2007 Box Test Method Class 1 or Class 2 – N/A

Arc Flash Jacket Category 2

Features & Benefits

  • Category 2 Arc Flash Protection
  • Two tone design – practical and stylish
  • Elasticated inner cuffs – wind proofing
  • Velcro fastening tabs on cuffs and back – improve fit
  • Radio loop attaching point on jacket left breast
  • Zipped Napoleon pocket on left breast with incorporated phone pocket – safe and secure
  • Inner pockets on right hand side – storage space
  • Covered, zipped hand pockets – keeps out debris and keeps contents secure
  • Mandarin collar – Maximum neck protection
  • 50mm double stitched reflective tape – increased durability
  • Microfleece lining – warmth and comfort
  • Easy Stretch side panels – wear comfort
  • Extended back – protection when bending over
  • SafetyICON™ on arm – visual EN standard
  • ThermSAFE™ plastic FR Zipper – CE Certified
  • ThermSAFE™ two-way plastic FR Zipper – Flexibility

➡ See full range of Arc Flash Clothing, PPE & Protection Garments 

Arc Flash Jacket 23 Cal Hi Vis Yellow

Arc Flash Jacket Order Code | ProGARM 9910

European Standards

ProGARM 9910 arc flash jacket conform to the following European Standards:

  • EN ISO 11612:2008 | A1 | B2 | C2 | F2
  • EN 1149-5:2008 | Pt. 5:2008 | Pt. 3:2004 | Charge Decay
  • EN ISO 20471:2013 | Class 3 excludes clause 5.6
  • IEC 61482-2:2009 | EBT50 = 23cal/cm² | ARC 2

Jacket | Care Information

ProGARM 9910 arc flash jacket must be carefully cleaned to ensure arc flash protection levels are maintained.

  • Do not bleach, boil or use soap based products – clean polo shirts using detergents only
  • Dirty clothing may lead to reduction in arc flash protection
  • Company will not accept liability for garments where care labels have been ignored, neglected, defaced or removed
  • Always store arc flash clothing in clean dry conditions
  • Do not store in places subject to direct strong sunlight

Arc Flash Jacket Size Chart

EU Size 44-46 48-50 52-54 56-58 60-62 64-66 68-70 72-74 76-78
CHEST (INCH) 43.3 44.9 48.8 52.8 56.7 60.6 64.6 68.5 72.4
CHEST TO FIT (INCH) 34-36 36-38 38-41 41-44 44-46 46-50 50-52 52-56 56-58
CHEST (CM) 110.0 114.0 124.0 134.0 144.0 154.0 164.0 174.0 184.0
CHEST TO FIT (CM) 85-90 90-95 95-102.5 102.5-110 110-115 115-125 125-130 130-140 140-145

Related Arc Flash Clothing Protection & Products


Arc flash clothing and garments in a layered combination deliver workwear protection against hazards according to IEC 61482 – PPE protects the worker against electric arc flash dangers. According to IEC 61482-1-1:2009 (encompassing NFPA 70E 2015) the 4 arc risk categories are numbered according to the severity threat and determine the clothing protection level required to protect against a minimum level of incident energy measured in calories / cm² – this is the ‘Open Arc’ test method and measures clothing protection level according to the Arc Thermal Performance Value (ATPV).

NFPA 70E outlines the requirements for safe work practices to protect personnel by reducing exposure to workplace electrical hazards.

NFPA 70E outlines the requirements for safe work practices to protect personnel by reducing exposure to workplace electrical hazards.

The ‘Box Arc’ tests clothing materials and fabric according to a pass/fail test by exposure to electric arc produced by 4kA (Class 1) and 7kA (Class 2) short circuits – this is IEC 61482-1-2:2009.

ARC 1 4 Cal ♦ ARC 2 8 Cal ♦ ARC 3 25 Cal ARC 4 40 Cal 

IEC Standard 61482 – Class 1

Garment Category – Jacket

Order Code – ProGARM 9910

  • Anti Static BS EN 1149-5:2008 Electrostatic Properties Of Protective Clothing
  • Flame Resistant EN ISO 11612:2015 Protective Clothing Against Heat & Flame

Arc Flash Jacket 23 Cal

arc flash protection product range

Electrical PPE Products | Gloves | Arc Flash Clothing | Arc Suits | Coveralls | Helmets & Visors


Arc Flash

Safety Wear & Arc Flash Protection | Thorne & Derrick understand how critical it is to have reliable, highest quality personal protection equipment (PPE), clothing and workwear available from stock at competitive prices – protecting utility workers against arc flash dangers posed during maintenance on underground electric cables, overhead line conductors or electrical equipment.

Data Sheets