Fire Rated Cable Matting | Class 0 Nitrile/PVC Sponge Sheeting
Fire Rated Matting
Metroseal ER22 Class 0 Nitrile/PVC Sponge Sheeting is a range of insulating matting specified for fire rated cable matting and cable protection applications – the fire rated matting is available in rolls or sheets in an excellent thermal insulator (sealing) material. The PVC cable sponge sheeting is available with a self adhesive backing for ease of application.
Flexible closed cell elastomeric thermal insulation material for condensation control in air-conditioning, refrigeration and chilled water installations. Class 0 Nitrile/PVC Sponge Sheeting is also suitable for reducing thermal losses in heating and plumbing systems.
The combination of technical properties, a low thermal conducting and a high resistance to water vapor transmission and competitive price makes it a cost effective energy saving solution.
Fire Rated Cable Matting
Features & Benefits
- Product Description: Nitrile/PVC Closed Cell Foam
- Metroseal Part Number: ER22
- Material Profile: See below technical information below
- Thickness: 6mm to 25mm
- Sheet Size: 1.0m wide in 8m, 10m, 14m, 20m and 30m rolls
- Finish: Smooth finish
- Cutting: Standard press-tools
- Zero water vapor permeability and almost zero water
- Good FR properties
- ER22 NBR/PVC Sponge is CFC and HCFC free
- No emissions of VOC
Material | Expanded / Sponge |
Application | General Purpose, High Temperture, Oil / Fuel Resistant |
Shore Hardness +/- 5º | None |
Thickness | 6mm, 9mm, 12mm, 15mm, 20mm, 25mm |
Temp Range | -150° C, -60°C, -50°C, -40°C, -30°C, -20°C, -10°C, +70°C, +80°C, +90°C, +100°C, +110°C |
Colour | Black |
Insertion Req | No |
Cloth/Plate | Plate / Plate |
Resistant To | N/A |
The stock roll size chart below of the fire rated cable matting represents the standard stock items and those that are not subject to any minimum batch quantities. Other size requirements for thickness, width, length or finish can be made to special order but would be subject to minimum production batch runs.
This normally would be:
- 1mm – 6mm thick – 100 linear metres
- 8mm – 25mm thick – 50 linear metres
- Over 25mm thick – 10 sheets
Further details available on request.
Surface Finish Codes:
- SS – Smooth finish both sides
- CC – Cloth impression both sides
- CS – Cloth impression one side, smooth the other
Class 0 Nitrile/PVC Sponge Sheeting
Insulating Matting Sizing & Specifications
Stock Roll Sizes (mm x mm x m) |
Surface Finish |
Weight (kg/M2) |
Specifications (compound) |
Values (typical) |
---|---|---|---|---|
6mm x 1000mm x 30m | Skin | Colour | Black | |
9mm x 1000mm x 20m | Skin | Compound | NBR/PVC | |
13mm x 1000mm x 14m | Skin | Density [specific gravity] | 1.5 | |
15mm x 1000mm x 10m | Skin | Thermal conductivity (mean te BS 874 Part 2 1986 @ +20°C |
0.037W/(m.K) | |
19mm x 1000mm x 20m | Skin | Water vapour permeability Moisture Resistance factor: |
µ>5,000 | |
25mm x 1000mm x 8m | Skin | (BS 4370 Part 2 1973) | 13/µgm/(N.h) | |
Minimum Temperature | -150°C | |||
Maximum temperature | +116°C | |||
Water Absorption: (by volume after 28 days) |
0.9% average | |||
Fire performance: BS 476 Part 7 1987 | Class “1” | |||
BS 476 Part 6 1989 | Class “0” | |||
Noise reduction: | Up to 30dB(A |
See Switchgear Matting | Class 0 Matting | Class 1 Matting | Class 2 Matting | Class 3 Matting | Class 4 Matting
MV-HV insulating matting also available for safe working on medium/high voltage switchgear/switchboards up to 33kV.
Insulating Matting | Electrical Safety & Protection for Low, Medium & High Voltage Switchgear