Quad Cable Cleats – CMP Quadplex QPSS Metal Cable Cleats
Quad Cable Cleats – Quadplex QPSS Metal Cable Cleats
Quad Cable Cleats
Quadplex QPSS Metal Cable Cleats
The QPSS cable cleats are metallic cable cleats which have been designed, constructed, and tested in accordance with the International Standard ‘cable cleats for Electrical Installations’ IEC 61914 to ensure the securing and retention of cables, without sustaining damage to the cable.
The range is fabricated from 316L stainless steel, giving it high creep strength whilst providing excellent corrosion resistance in the harshest of environments.
The cabe cleat has one M8 coach bolt fixing hole integrated into the C-Clamp allowing versatility to the installer during installation.
Liners come as standard which help to restrain the cable(s) within vertical applications. Where thermal elongation of cables occurs, the liner also provides a layer of protection between the cable sheath and the cable cleat during normal operation. This additional layer protects the cable from chafing on any mounting surface due to differential movements such as those found in marine and offshore applications. The liners also assist in the extra protection of cable(s) in the event of short circuit fault conditions. The standard liners supplied are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free.
CMP Quadplex QPSS
Features
- Third party certification to IEC 61914
- 316L stainless steel
- For quadplex/standard quad formation
- Operating temperature -50°C to +60°C or -58°F to +140°F
- Liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free
| Type | 6.1.3 Composite QPSS – Standard Duty Stainless Steel |
| Design Specification | IEC 61914 |
| Temperature for permanent application | -50°C to +60°C IEC 61914 clause 6.2 |
| Needle Flame Test | Pass – 120 second flame application time IEC 61914 clause 10.0, 10.1, IEC 60695-11-5 |
| Lateral Load Test | Refer to CMP Products, IEC 61914 clause 9.3 |
| Axial Load Test | Refer to CMP Products, IEC 61914 clause 9.4 |
| Impact Resistance | Pass – Very heavy IEC 61914 clause 6.3, 6.3.5, 9.2 |
| Material | 316L Stainless Steel with Standard Liners Standard liners are classified as Low Smoke & Fume (LSF), Zero Halogen (LS0H) and Phosphorus Free |
SHORT CIRCUIT TESTING TO IEC 61914 – CLAUSE 9.5
| Quad Formation | |||
| Two short circuits 300mm fixed cleat centres | Two short circuits 600mm fixed cleat centres | One short circuit 600mm fixed cleat centres | Two short circuits 600mm fixed cleat centres with intermediate restraints |
| 0.1 sec | 0.1 sec | 1 sec | 0.1 sec |
| 135kA Peak | 79.5kA Peak | 62kA Peak | 100kA Peak |
| 61.3kA r.m.s | 37.8kA r.m.s | 29.5kA r.m.s | 47.6kA r.m.s |
Quadplex QPSS Cable Cleats Technical Illustration
CMP Quad Cable Cleats
Product Selection Table
| Quad Part No. | Quad Plex Ø Range ‘A’ (mm) | Cleat Width ‘B’ (mm) | Cleat Depth ‘C’ (mm) | Weight (g) | Fixing Hole Ø | |
| Min Ø | Max Ø | |||||
| QPSS-19 | 17.5 | 20.5 | 30.5 | 33.5 | 187 | 1 x M8 |
| QPSS-21 | 19.5 | 22.5 | 32.5 | 33.5 | 190 | 1 x M8 |
| QPSS-24 | 22.5 | 25.5 | 35.5 | 33.5 | 194 | 1 x M8 |
| QPSS-26 | 24.5 | 27.5 | 37.5 | 33.5 | 202 | 1 x M8 |
| QPSS-36 | 34.5 | 37.5 | 47.5 | 33.5 | 216 | 1 x M8 |
| QPSS-38 | 36.6 | 39.5 | 49.5 | 33.5 | 218 | 1 x M8 |
| QPSS-42 | 40.5 | 43.5 | 50.5 | 33.5 | 218 | 1 x M8 |
| QPSS-56 | 54.5 | 57.5 | 67.5 | 53.5 | 290 | 1 x M8 |
| QPSS-58 | 56.5 | 59.5 | 69.5 | 53.5 | 293 | 1 x M8 |
| QPSS-60 | 58.5 | 61.5 | 71.5 | 53.5 | 296 | 1 x M8 |
