Nexans MONOe Heat Shrink Termination | XLPE Outdoor Single Core 12kV 24kV 36kV MV

Published 05 Dec 2018

Cable Terminations

Cable Terminations | Heat Shrink | Cold Shrink | Push-On | MV HV Medium & High Voltage

Cable Terminations

Nexans MONOe are single core heat shrink cable terminations for use outdoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12) kV
  • 6.35/11 (12) kV
  • 8.7/15 (17.5) kV
  • 12/20 (24) kV
  • 12.7/22 (24) kV
  • 18/30 (36) kV
  • 19/33 (36) kV

Nexans MONO type MV cable terminations are heat shrink terminations consisting of a single-piece heat shrink tube – the anti track tube features integral stress control co-extruded into the heat shrink tubing suitable for terminating single core polymeric insulated cables, such as XLPE or EPR, with working voltage classes of 11kV, 24kV and 33kV.

Both Nexans MONOi (Indoor Termination) and MONOe (Outdoor Termination) contain sufficient material to terminate 3 single core cables i.e. 3 phase cable termination kits.

Nexans MONOe Heat Shrink Termination

Nexans MONOe Heat Shrink Termination

Nexans MONOe

MV HV Heat Shrink Outdoor Cable Terminations

Up To 33kV

The following table enables the selection of Nexans MONOe outdoor heat shrink terminations for 11kV, 24kV and 33kV voltage cables:

Voltage Um kV Outdoor Cable Termination Nexans Type Application Range (sqmm) Termination L (mm)
11/12kV 3x12MONOe 1.95 25-95 390
11/12kV 3x12MONOe 1.240 70-240 390
11/12kV 3x12MONOe 1.400 185-400 410
11/12kV 3x12MONOe 1.630 400-630 440
24kV 3x24MONOe 1.95 25-95 410
24kV 3x24MONOe 1.240 70-240 410
24kV 3x24MONOe 1.400 185-400 440
24kV 3x24MONOe 1.630 400-630 490
33/36kV 3x36MONOe 1.95 25-95 470
33/36kV 3x36MONOe 1.240 70-240 470
33/36kV 3x36MONOe 1.400 185-400 500
33/36kV 3x36MONOe 1.630 400-630 520

 

Nexans

Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.

Nexans Joints Connectors Terminations

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

 ➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans 

Thorne & Derrick International

 

Further Reading