Static Discharge Sticks 33kV – CATU CM-50 Medium Voltage Static Ground Discharge Stick

Published 22 Nov 2018

CATU CM-50 Medium Voltage Static Ground Discharger

• uploaded by Chris Dodds - Thorne & Derrick Sales & Marketing Manager

Static Discharge Sticks

Product Launch – MV Medium Voltage Static Ground Discharge Stick

Thorne & Derrick supply the CATU CM-50 Static Discharge Stick used for medium/ high voltage overhead lines, busbars and substation use up to 33kV. The CATU discharge stick complies to the IEC 60855 standard and is used to safely dissipate electrostatic charges.

♦ IEC 60855-1:2016 Standard | Live Working – Insulating foam-filled tubes and solid rods. Part 1: Tubes and rods of a circular cross-section.

CATU CM-50 static discharge stick is an insulating orange tube with a diameter of 39mm and made of epoxy fibreglass – equipped with 6 metre of copper cable, cross section section 6sqmm, PVC insulated.

Static discharge sticks are designed to safely remove the static charge after de-energising of medium/high voltage power systems – this includes draining voltage retaining components before maintenance work is performed up to 33kV. The discharge sticks are equipped with hand guard and grip protection with sufficient electrical safety clearance against physical contact with medium/high voltages.

Static discharge sticks are available for higher voltage applications – contact us to discuss your MV HV EHV Electrical Safety Equipment requirements. 

IEC 60855 | Discharge Sticks for Medium Voltage Substations

Catu CM-50 Static Discharge Stick Specification

T&D are the UK’s largest stockis of CATU Electrical Safety Equipment of products for underground, overhead line and substation safety at LV, MV and HV cable networks.

Insulating Gloves | Insulating Matting | Voltage Detectors | Arc Flash Clothing | Substation Safety | Portable Earthing LV MV HV

Further Reading

• Static Discharge Sticks – CATU CM-50 Medium Voltage 33kV Size: 93.71 KB