Salisbury can offer a complete solution of Personal Protective Equipment (PPE) for all electrical workers. Salisbury personal protective equipment protects workers against electrical hazards as defined by OSHA Regulations and the NFPA 70E Standard for Electrical Safety in the workplace.
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
The EHV cable jointers on this installation were Steve Fielder and Matt Taffs – the fluid fitters were Stephen McLean and Billy Miller.
The Prysmian EHV cable joint was installed under induced voltage working conditions after a canal boat mooring spike was accidentally hammered into the cable causing a cable fault.
The canal had to be dammed off so a new concrete trench could be cast by the civil engineers to house the repair joint.
The ferrule is 1050mm in length providing an overall installed cable joint length exceeding 6 metres. The cable insulation is built up using block paper rolls, each profile end is then hand carved before the flashover roll is applied and finally screened.
The sequence of photographs show the highly-skilled process of wiping and plumbing high voltage cables and the boxing up and then loading of the cable onto a permanent lifting frame ready to lower into the cable trench. Water cooling pipes were required during the fitting of the Prysmian joint and joint shell mould body.
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
The underground high voltage power cables protected by Class 1 cable duct are being stripped and prepared prior to terminating into 66kV substation switchgear.
Image :Â Smith Bros Contracting
T&D are leading distributors of MV Jointing Equipment and are approved suppliers for 3M Cold Shrink, SPS Heat Shrink and Nexans Euromold EPDM Rubber type cable joints, terminations and connectors for 11kV-33kV medium voltage distribution networks.
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. âž¡
Image: Ibrahim Tunca – SGB Otomasyon Elektrik Enerji İth.İhr.San.ve Tic.Ltd.Åžti ÅŸirketinde Sales Marketing Manager
ASTOR produces transformers used in electric energy transmission and distribution in an efficient and environmentally-sensitive way – ASTOR manufacture power and distribution transformers between 5 MVA-150 MVA, 36kW-220kW.
ASTOR MV-HV Power & Distribution Transformers
Distribution Transformers
Power Transformers
Dry Type Transformers
Special Type Transformers
Jointers blog
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
15,000+ Subscribers. âž¡
Image Courtesy of :Â Andrew Gebers (Tshepang Electrical –Â Johannesburg Area, South Africa)
Subscribe now to our POWER NEWSLETTER– a monthly email circulation packed with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
Includes access to our popular JOINTERS BLOG with contributions from utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
Celebrating Charlie & Ella’s Level 4 Sales Executive Apprenticeships At Thorne & Derrick International, we are proud to champion talent development and recognise the dedication required to achieve professional growth. We are therefore delighted to congratulate Charlie Baines and...
Thorne & Derrick will be Exhibiting at Solar & Storage Live UK 2026 at the NEC Birmingham from 22nd–24th September, showcasing our support for HV Cable Accessories, Joints, Terminations, Separable Connectors, Cable Tooling and Grid Connection Products used across...