Martindale VIPD150 Voltage Indicator & Proving Device Kit

Martindale VIPD150 Voltage Indicator & Proving Device Kit

Martindale VIPD150 Voltage Indicator & Proving Device Kit


voltage indicator kit

Martindale VIPD150 Voltage Indicator VI-15000 (unfused) & proving device PD690 kits form a part of the Martindale electrical test equipment product portfolio.

The Martindale VIPD150 kit includes the VI-15000 voltage indicator and matching PD690 proving unit. Kits are supplied in the TC69 combination carry cases to ensure that proving devices are always at hand and allow for safe isolation practices on-site in accordance the Electricity at Work Regulations.

Martindale VI-15000 has a 1000V CATIV safety rating and LED indication for AC/DC voltages from 50V to 690V and above, ensuring compliance with health and safety recommendations for safe working in all BS EN61010 installation categories. It’s the simplest and most reliable way to ensure circuits have been de-energised and properly isolated prior to maintenance and modifications.

The Martindale PD690 is a 700V AC/DC proving device, designed to enable voltage indicators to be fully checked, in compliance with Health & Safety recommendations. The PD690 is compatible with the new Martindale VI-13800 & the Martindale VI-13700. This proving device is a portable, battery powered proving unit with the option of being driven from a 12V supply via a car or mains power supply. The kit is supplied with a combination carry case for both VI and PD products to ensure the proving unit is always to hand. For convenience and to save time, the proving unit can be used without having to remove it from the case.

Martindale VIPD150

Martindale VI-15000 & PD690

Martindale viPD150


Martindale VI-15000 Voltage Indicator Martindale PD690 Proving Device
Voltage Range 50-1000V DC/AC rms Output Voltage 700V nominal
Nominal Voltage Threshold 50,120,230,400, 690 V DC/AC rms Output Frequency 50Hz nominal
Voltage Threshold Tolerance conforms to BS EN61243-3:2010 Operating Temperature -10°C to 40°C at max. 70% R.H
AC/DC Voltage Detection Automatic Altitude up to 2000m
Range Detection Automatic Pollution Degree 2
Response Time < 0.1 s Power Internal batteries or external power sourse
Frequency Range DC, 0-400 Hz Internal Batteries 6 x 1.5V, AA alkaline batteries (IEC LR6, NEDA 15A)
Test Current 3.5mA max at 1000V DC/AC rms External Power Source 12V DC max. at 2A min.
Duty Ratio 30 s ON (operated) / 240 s OFF (recovery) External Power Socket 2.5mm jack socket, centre positive
Temperature & Humidity (Operating & Storage) -10°C to 55°C ≤ 85% R.H. Dimensions 143 x 84 x 50mm
Altitude up to 2000m Weight Packed 400g approx with batteries
Pollution Degree 2 Includes 6 x 1.5V AA alkaline batteries & instructions
Power From circuit under test Martindale Electric
Dimensions 205(L) x 67(W) x 27(D) mm
Weight approx. 130g
Safety Conforms to BS EN61243-3:2010 CAT IV 1000 V
Class II, double insulation
IP Rating IP54
EMC Conforms to BS EN61326-1


Martindale VI-13800 Voltage Indicator

Electrical Test Equipment, Voltage Detection & Safe Isolation | View Martindale Electric range.

martindale kits


VI-15000 Voltage Indicator * * *
PD690 Proving Unit * * *
TC69 Combination Carry Case * * *
LOKKIT1 12 Piece Kit *
LOKKITPRO 17 Piece Kit *

Electrical Safety LV MV HV

Thorne & Derrick International distribute an extensive range of Electrical Test, Voltage Detection & Safe Isolation Equipment for use on underground cable systems and overhead line conductor networks for LV Low Voltage, MV Medium Voltage and HV High Voltage power networks – including 600/1000v, 11kV, 33kV, 66kV, 132kV medium/high voltages and 275kV/400kV transmission and distribution networks.

Data Sheets