Bare Stranded Copper Cable | Furse

Bare Stranded Copper Cable Conductor
Furse
Copper conductors are used for most installations due to its high conductivity, anti-corrosive properties, and its flexibility for use in-air, in-earth and in-concrete forming part of the Furse range of conductors.
Furse bare stranded copper cable is available in a range of sizes to meet differing current ratings (see product information table). Additional sizes are also available on request.
Furse Product Details
-
Highly conductive soft or hard drawn stranded copper cable
-
Tinned soft drawn stranded copper cable available on request
-
Bare stranded copper cable supplied unbranded
Earthing Standards
- BS EN 60228 (soft drawn)
- BS 7884 (hard drawn)
Furse Bare Stranded Copper Cable
âž¡ The following table enables the selection of bare stranded copper cable manufactured by Furse – should you require any further information please do not hesitate to contact us.
Conductors
Earthing conductors are available in high conductivity copper and aluminium as bare, tinned or lead with PVC or LSOH (Low Smoke Zero Halogen) covering – conductors are used to prevent large transients entering a buildings power distribution system safely dispersing the electrical currents.
Furse Bare Stranded Copper Cable | Cross-sectional area (sqmm)Â |
Stranding no. / mm ø |
Nominal diameter (mm)Â | Weight per metre (kg) |
Soft drawn stranded copper cable | ||||
CB016 | 16 | 7/1.70 | Ø 5.10 | 0.17 |
CB025 | 25 | 7/2.14 | Ø 6.42 | 0.23 |
CB035 | 35 | 7/2.52 | Ø 7.56 | 0.32 |
CB050-FU | 50 | 19/1.78 | Ø 8.90 | 0.43 |
CB070 | 70 | 19/2.14 | Ø 10.70 | 0.62 |
CB095 | 95 | 19/2.52 | Ø 12.60 | 0.86 |
CB120 | 120 | 37/2.03 | Ø 14.21 | 1.09 |
CB150-FU | 150 | 37/2.25 | Ø 15.75 | 1.33 |
CB185 | 185 | 37/2.52 | Ø 17.64 | 1.67 |
CB240 | 240 | 61/2.25 | Ø 20.25 | 2.20 |
CB300-FU | 300 | 61/2.52 | Ø 22.68 | 2.76 |
CB400-FU | 400 | 61/2.85 | Ø 25.65 | 3.53 |
Hard drawn stranded copper cable | ||||
CB071 | 70 | 7/3.55 | Ø 10.70 | 0.64 |
Furse solid circular conductors are available in both copper and aluminium.
Copper is used for most installations due to its high conductivity, anti-corrosive properties, and its flexibility for use in-air, in-earth and in-concrete.
Furse Product Details
-
All solid circular conductor sold in full coil lengths only
Earthing Standards
- BS EN 13601 (copper)
- BS EN 755-5 (aluminium)
Furse Solid Circular Conductors | Conductor material | Diameter (Mm) | Cross-sectional area (sqmm) | Standard coil size (m) | Weight per metre (kg) |
Copper conductor | |||||
CD035 | Copper | Ø 8 | 50.27 | 50 | 0.44 |
Aluminium conductor | |||||
CD080 | Aluminium | Ø 8 | 50.27 | 50 | 0.12 |
Tinned copper conductor | |||||
CD235 | Tinned Copper | Ø 8 | 50.27 | 50 | 0.44 |

Bare Conductors, Bare Standard & Tinned Conductors

Furse Earthing & Lightning Protection – Conductors

Conductors | Air Termination | Conductor Clips | Earth Rods | Earth Bonds | Earth Bars | FurseWELD | Electronic Systems Protection