Cold Shrink End Caps

View Sub Products

Filoform Cable Joints - Connect Seal Protect

Filoform Cold Shrink End Caps

Cable Caps

cold shrink end caps

Cold Shrink End Caps, manufactured by Filoform, environmentally seal and mechanically protect exposed cable ends using no tools, mastics or tapes. The cable caps are close-ended, tubular rubber sleeves that are factory expanded using Cold Shrink technology, and loaded onto a removable core. When the cable cap is positioned over the end of a cable, or other cylindrical object, the core is removed to provide a reliable seal which protects your LV MV HV cable ends from environmental damage. The cable caps are easily installed and cleanly removable. Whether in transit from the manufacturer, stored in the cable yard, or in process in a trench, your cable ends are protected from exposure to moisture, contamination and corrosion. Four different end caps are available to accommodate a wide range of sizes – Cold Shrink is cold applied, unlike heat shrink, it does not require a naked flame or heat shrink torch to install for safe use in potentially explosive atmospheres and hazardous area locations.

Cable Caps Features

  • Simple and fast manual installation, no tools required to install Cold Shrink
  • Cable caps accommodate size ranges from 11.6mm – 84.3mm
  • Seals cables tight, retains resiliency and pressure even after prolonged years of ageing and exposure
  • Water-resistant cable end seals
  • No mastic or electrical tapes required
  • No torches or heat required
  • Resists fungus
  • Resists acids and alkalis
  • Resists ozone
  • Cold Shrink is easily removed
  • No training required for installation
  • More from Filoform | Duct Seals

Filoform Order Code Cable End Caps – Product Name Caps per Bag
FiloShrinkCE-1 Cold-shrink end cap type 1 1 pcs/bag
FiloShrinkCE-2 Cold-shrink end cap type 2 1 pcs/bag
FiloShrinkCE-3 Cold-shrink end cap type 3 1 pcs/bag
FiloShrinkCE-4 Cold-shrink end cap type 3 1 pcs/bag

cold shrink end caps specifications

Filoshrink Cold Shrink End Caps protect cables, pipes and other cylindrical objects from exposure to moisture, contamination, corrosion, ozone, ultra-violet radiation, physical contact and other environmental hazards.

The following table enables the correct selection and specification of Cold Shrink cable caps depending upon the cable type:

Size of Conductor 1 Core Armoured 2 Core Armoured 3 Core Armoured 4 Core Armoured 5 Core Armoured
1.5 mm² * CE 1 CE 1 CE 1 *
2.5 mm² * CE 1 CE 1 CE 1 *
4 mm² * CE 1 CE 1 CE 1 *
6 mm² * CE 1 CE 1 CE 2 *
10 mm² * CE 1 CE 2 CE 2 *
16 mm² * CE 2 CE 2 CE 2 *
25 mm² * CE 2 CE 2 CE 3 *
35 mm² * CE 2 CE 3 CE 3 *
50 mm² CE 1 CE 2 CE 3 CE 3 *
70 mm² CE 2 CE 3 CE 3 CE 3 *
95 mm² CE 2 CE 3 CE 3 CE 3 *
120 mm² CE 2 CE 3 CE 3 CE 4 *
150 mm² CE 2 CE 3 CE 3 CE 4 *
185 mm² CE 3 CE 3 CE 4 CE 4 *
240 mm² CE 3 CE 4 CE 4 CE 4 *
300 mm² CE 3 CE 4 CE 4 CE 4 *
400 mm² CE 3 CE 4 CE 4 CE 4 *

* POA

Cold Shrink

Cold Shrink Products | Cable Caps | Tubes | Cable Joints | Cable Abandonment Kits