Home > Blog > ALROC PG PRG Strip & Remove Cable Sheath Jackets from LV MV HV Cables

ALROC PG PRG Strip & Remove Cable Sheath Jackets from LV MV HV Cables

Published 22 Jan 2021

PG4 HTA MV HV Cable Jointing Tool

Alroc PG MV HV Cable Jointing Tool

INSULATION REMOVAL & STRIPPING TOOL

BY ALROC

MV HV Medium & High Voltage Cables

Alroc PG cable tools are used by MV-HV jointers to remove the outer sheath to prepare the cable ready for the installation of joints, terminations or connectors.

The PG tool manufactured by Alroc is safer and more precise than a knife enabling the user to make a circular and longitudinal cut in order to remove cable’s outer sheath by the jointer. All cable sheath cutting depth ranging from 0,5 mm / 0,019 in to 5 mm / 0,196 in are available on demand.

The Alroc PG range of cable sheath and cable jacket strippers are compatible with: XLPE, PE, PVC, LLPE, PUR and rubber type sheathed cable jackets.

Cable preparation is essential to the performance and stability of MV-HV cable joints and terminations – if cables are prepared incorrectly using sub-standard tools or basic hand tools then the risk incidence of cable failure is increased.

ALROC

Alroc Cable Tools 11kV 33kV MV HV

ALROC

For more than 30 years, ALROC has been engineering, designing and manufacturing cable jointing tools, cable preparation tools and cable fixing solutions to establish the most complete product range in the following areas:

  • LV cable
  • MV cable
  • HV cable
  • Optical Fibre cable and tube
  • Telecomunications cable
  • Coaxial cable
  • Steel gas pipe
  • Cable holding and fixing solutions

Jointing & Preparation Tools For Cable Jointers & Linesmen Working On MV-HV-EHV Cables

Thorne & Derrick
THORNE & DERRICK

Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage power systems:

  • Slip-on Cable Terminations
  • Cold-shrink Cable Terminations
  • Heat-shrink Cable Terminations
  • Cable Joints – Heat & Cold-shrink
  • Separable Connectors (Euromold)
  • Surge Arresters & Switchgear/Transformer Bushings

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MVÂ