Insulating Matting | Class 2 MV Medium Voltage 17kV | BS EN 61111
Class 2 Matting
The COBAswitch Class 2 Matting provides reliable electrical insulation for medium-voltage (MV) environments. Designed for substations, switchgear, and industrial applications, these mats ensure operator safety and comply with BS EN 61111:2009 standards.
The IEC61111 Class 2 insulating matting is fully certified and tested to 30kV with a recommended safety working voltage of 17kV.
Read Blog  ➡ Insulating Matting – IEC 61111 Specifications & Selection For Switchboard Matting
Why Choose Class 2 Mats?
- Operator Safety: Protects against electrical shocks up to 17 kV
- Standards Compliant: Fully tested to BS EN 61111:2009 / IEC 61111:2009
- Durable Material: EPDM rubber construction for longevity and insulation
- Anti-Slip Surface: Ribbed for grip and operator comfort
- Easy Installation: Loose-lay – no adhesives or fixings required
- Temperature Range: -30°C to +80°C for MV environments
Class 2 Matting Product Specifications
| Specification | Details |
|---|---|
| Class | Class 2 |
| Thickness | 4 mm |
| Working Voltage | 17 kV |
| Withstand Tested To | 30 kV |
| Material | EPDM Rubber |
| Surface Finish | Fine fluted ribs (anti-slip) |
| Roll Length | 10 m |
| Installation | Loose lay, no adhesives or fixings required |
| Environment | Indoor/outdoor MV areas |
Applications for BS EN 61111 Certified Insulating Mats
- MV switchgear and substations
- Industrial panels and utility areas
- Electrical maintenance zones
- Medium-voltage equipment areas
Gallery
Insulating Matting FAQs
What class of insulating matting do I need?
For Class 2, the maximum working voltage is 17 kV. This is ideal for:
- MV switchgear
- Substations
- Industrial panels
If unsure, our sales engineers can advise on correct class selection and compliance.
What’s the difference between Class 0, 2, and 4?
The classes indicate voltage rating, thickness, and protection level:
- Class 0 → 3 mm, up to 1 kV (LV environments)
- Class 2 → 4 mm, up to 17 kV (MV environments)
- Class 4 → 5 mm, up to 36 kV (HV environments)
Class 2 is thicker than Class 0 and suitable for MV areas, fully tested for operator safety.
Can Class 2 insulating mats be used outdoors?
Yes — Class 2 mats are made of EPDM rubber which is:
- Moisture and humidity resistant
- UV and ozone resistant
- Durable in low temperatures
Best suited for MV panels, substations, and exposed industrial environments.
Do Class 2 mats comply with BS EN 61111?
Absolutely. Each mat is fully tested to BS EN 61111:2009 including:
- Dielectric tests
- Proof voltage tests
- Thickness verification
- Batch marking and identification
Ensuring complete operator safety in MV environments.
BS61111-Compliant Insulating Mats for LV & HV Electrical SafetyDownload
