3M 7600-S-3W Cold Shrink Cable Terminations
➡ See below the complete range of 3M Cold Shrink Cable Terminations suitable to terminate MV HV Power Cables from the 3M 7600-S-3W range.
Cold Shrink Terminations
3M Cold Shrink QTIII 7600S-W series cable terminations to connect medium/high voltage 3 core shielded power cables – all 3M QTIII cold shrink terminations are manufactured by 3M from silicone rubber and include breakout boot and re-jacketing sleeve assembly.
- Manufacturer: 3M
- Termination Technology: Cold Shrink
- Product Number: 7600-S-3W
- Insulator Configuration: Outdoor Termination
- Orientation: Normal
- For MV HV Cable Type (With or Without Ground Wires): W (Without)
- See also MV Lugs | HV Lugs
➡ 3M 7600-S-3W Cold Shrink Cable Terminations use re-jacketing sleeves to reduce sliding friction and deliver the silicone rubber Cold Shrink tube onto the cable phase metallic shielding of the MV HV cable.
➡ 3M 7600-S-3W Cold Shrink Cable Terminations are designed to terminate and connect both copper wire screen and copper tape screen cables on medium/high voltage power systems, switchgear and substations, includes 11kV and 33kV 3 core and single core cables (XLPE EPR).
Cable Terminations
3M 7600-S-3W
The following table enables the specification and selection of 3M 7600-S-3W Cold Shrink Cable Terminations in accordance with IEC, JIS and AEIC specifications and medium/high voltage classifications as follows: 3.3kV, 5kV, 6.6kV, 8.7kV, 10kV, 15kV, 20kV, 25/28kV, 30kV and 35kV.
3M Cable Termination | BIL kV | Cable Range (mm) | 3.3kV IEC
sqmm |
3.3kV JIS
sqmm |
5kV AEIC
AWG |
6.6kV JIS
sqmm |
6.6kV IEC
sqmm |
8.7kV AEIC
AWG |
10kV IEC
sqmm |
15kV IEC
sqmm |
15kV AEIC
AWG |
20kV IEC
sqmm |
25/28kV AEIC
AWG |
30kV IEC
sqmm |
35kV AEIC
AWG |
7620-S2-3W | 95 | 8.40-12.7 | 16-35 | 8-22 | 8-2 | – | 16-25 | 6-4 | – | – | – | – | – | – | – |
7621-S2-3W | 95 | 12.7-17.8 | 50-95 | 38-60 | 1-3/0 | – | 35-70 | 2-2/0 | 10-50 | 16-25 | – | – | – | – | – |
7622-S2-3W | 110 | 17.8-23.4 | 120-185 | 100-150 | 4/0-400 | 60-100 | 95-150 | 3/0-350 | 70-150 | 35-95 | 1/0-4/0 | – | – | – | – |
7691-S4-3W | 150 | 12.7-17.8 | 50-95 | 38-60 | 1-3/0 | – | 35-70 | 2-2/0 | 10-50 | 16-25 | – | – | – | – | – |
7692-S4-3W | 150 | 17.8-23.4 | 120-185 | 100-150 | 4/0-400 | 60-100 | 95-150 | 3/0-350 | 70-150 | 35-95 | 1/0-4/0 | 25-70 | 2-/10 | – | – |
7693-S4-3W | 150 | 23.4-30.0 | 240-300 | 200-250 | 500-750 | 150-250 | 185-300 | 400-600 | 185-300 | 120-185 | 250-450 | 95-185 | 2/0-250 | – | – |
7695-S4-3W | 150 | 30.0-38.6 | – | 300-325 | 800-1000 | 300-325 | – | 750-1000 | – | 200-325 | 500-750 | 240-300 | 300-500 | – | – |
7684-S8-3W | 200 | 23.4-30.0 | 240-300 | 200-250 | 500-750 | 150-250 | 185-300 | 400-600 | 185-300 | 120-185 | 250-450 | 95-185 | 2/0-250 | 35-70 | 1/0-3/0 |
7685-S8-3W | 200 | 30.0-38.6 | – | 300-325 | 800-1000 | 300-325 | – | 750-1000 | – | 200-325 | 500-750 | 240-300 | 300-500 | 95-240 | 4/0-500 |
➡ Visit Cold Shrink Joints for further information about the 3M Electrical ranges of jointing and splicing products for LV MV HV cables.