Euromold 670AR-2 Equipment Bushing 11kV 24kV

Euromold 670AR-2 is a bushing specified to terminate and connect medium/high voltage cables in the following voltage classes:

6/10 (12kV)
6.35/11 (12kV)
8.7/15 (17.5kV)
12/20 (24kV)
12.7/22 (24kV)

Euromold 670AR-2 bushings can be supplied as a tee connector (676LRA) or plug-in type epoxy bushings – all suitable for use with Interface D type bushings on SF6 gas-insulated switchgear.

Connector accessories include: dead-end receptacle, dead-end plug, stand-off plug and earthing plug for type D interfaces.

Manufacturer – Nexans Euromold
MV HV Equipment Bushing Connector – Interface D
Maximum Operating Current – 1250A (Amps)
Voltage Classes – 12kV 24kV Maximum
Terminate & Connect Cables – Polymeric XLPE EPR
Applications – MV HV Switchgear, Transformers, Motors

➡ See complete range of Nexans Euromold Connectors

EUROMOLD 670AR-2 Specification

Euromold equipment bushing type	Voltage Um (kV)	Current Ir (A)
670AR-2	12	1250
K670AR-2	24	1250

To order the equipment bushing, specify the type. The bushings can be supplied with an earth jumper (/J) or an earth plate (/GS). E.g. K670AR-2/GS.

Euromold 670AR-2 Equipment Bushing 11kV 24kV – Design

EUROMOLD 670AR-2 FIXINGS FOR BUSHINGS

Euromold 670AR-2 Fixing For Equipment Bushings

Watch Video ➡ Nexans Euromold 600 Series 1250A 24kV

Euromold MV HV | Cable Terminations, Connectors, Elbows & Joints

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions.

Enquire