LSF Low Smoke Zero Halogen Covered Copper Earthing Tapes

LSF Low Smoke Zero Halogen Covered Copper Earthing Tapes

LSF Low Smoke Zero Halogen Covered Copper Earthing Tapes

T&D distribute the complete range of low smoke zero halogen Earth Tapes manufactured from high conductivity copper by AN Wallis in an extensive range of widths and thicknesses from 25 x 3mm (75sqmm C.S.A. Cross Section Area) to 50 x 6mm (300sqmm C.S.A.) – LSF low smoke zero halogen covered copper earthing tapes are available in a selection of coil sizes.

LSF low smoke zero halogen covered copper tape earth conductors with fault current ratings according to BS7430 with an initial copper conductor temperature of 30°C and a maximum temperature of 250°C.

➡ Earth Rods | Copper Earth Plates | Copper Earth Mats | Copper Conductors

LSF Low Smoke Zero Halogen

Copper Earthing Tapes

Selection Table

The table enables the selection of LSF covered earth tapes when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number Earth Tape W x H Copper Cross Sectional Area (CSA) / Thickness Weight Per Metre Standard Copper Coil Size
TP 253 GRLSF 25mm x 3mm 75sqmm 0.77kg 25m & 50m
TP 256 GRLSF 25mm x 6mm 150sqmm 1.53kg 40m
TP 506 GRLSF 50mm x 6mm 300sqmm 2.95kg 20m

Copper Earth TapeLSF Low Smoke Zero Halogen Covered Copper Earthing Tapes

LSF low smoke zero halogen covered copper earthing tapes are specified for above ground earthing conductors due to copper theft risk of insecure stranded copper conductors – a complete range of earth bars, connector joints, fixing clips and clamps for connecting conductor tape to copper earth rods.

Earth Tapes
Earthing Tapes

Earth Tapes, Cables & Conductors – bare copper, PVC covered and LSOH (Low Smoke Zero Halogen) tapes, hard drawn copper bar and earth braids. LV-HV-EHV earthing tapes and systems for substations, transformers and generators.

Substations LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.

Substations - Cable Joints Duct Seals Cable Covers 11kV 33kV

T&D, Supporting contractors involved in MV-HV Switchgear Testing, Substation Maintenance, Cable Laying & Jointing at 11kV, 33kV & EHV

➡ Contact T&D for competitive prices and fast delivery from stock for LSF Low Smoke Zero Halogen Covered Copper Earthing Tapes.

Data Sheets