PVC Covered Copper Earthing Tapes

T&D distribute the complete range of PVC covered Earth Tapes manufactured from high conductivity copper by AN Wallis in an extensive range of widths and thicknesses from 12.5 x 1.5mm (18.75sqmm C.S.A. Cross Section Area) to 50 x 6mm (300sqmm C.S.A.) – PVC covered copper earthing tapes are available in a selection of coil sizes and colours.

PVC covered copper tape earth conductors with fault current ratings according to BS7430 with an initial copper conductor temperature of 30°C and a maximum temperature of 250°C.

➡ Earth Rods | Copper Earth Plates | Copper Earth Mats | Copper Conductors

PVC Covered Copper Earthing Tapes

Selection Table

The table enables the selection of PVC covered copper earth tapes when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number	Earth Tape W x H	Colour	Copper Cross Sectional Area (CSA) / Thickness	Weight Per Metre	Standard Copper Coil Size
TP 121 BL	12.5mm x 1.5mm	Black	18.75sqmm	0.21kg	100m
TP 253 B	25mm x 3mm	Brown	75sqmm	0.77kg	25m & 50m
TP 253 BL	25mm x 3mm	Black	75sqmm	0.77kg	25m & 50m
TP 253 G	25mm x 3mm	Grey	75sqmm	0.77kg	25m & 50m
TP 253 GR	25mm x 3mm	Green	75sqmm	0.77kg	25m & 50m
TP 253 S	25mm x 3mm	Stone	75sqmm	0.77kg	25m & 50m
TP 253 W	25mm x 3mm	White	75sqmm	0.77kg	25m & 50m
TP 256 GR	25mm x 6mm	Green	150sqmm	1.33kg	40m
TP 503 GR	50mm x 3mm	Green	150sqmm	1.33kg	40m
TP 506 GR	50mm x 6mm	Green	300sqmm	2.68kg	20m

METALLIC DC CLIPS FOR USE WITH

PVC Covered Copper Earthing Tapes

PVC covered copper earth tapes can be secured and installed to buildings and substations using metallic DC clips – fixed using countersunk woodscrew 1 1/2″ x No.10 and No.10 wall plug.

Material: Gunmetal

Conductor Size mm	L mm	W mm	H mm	Unit Weight kg	Pack Quantity	AN Wallis Part Number
25 x 3	55	20	14	0.06	25	DGP 253
25 x 6	58		18	0.11		DGP 256
50 x 6	91		19	0.20		DGP 506

NON-METALLIC DC CLIPS FOR USE WITH

PVC Covered Copper Earthing Tapes

UV stabilised for outdoor location and installation of earth tapes with one-piece and hinged lid design – DC clips are fixed using countersunk woodscrew 1 1/2″ x No.10 and No.10 wall plug.

Material: Polypropylene

Conductor Size mm	L mm	W mm	H mm	Colour	Unit Weight kg	Pack Quantity	AN Wallis Part Number
25 x 3	50	18	16	Brown	0.01	100	NP 253 B
				Black			NP 253 BL
				Grey			NP 253 G
				Green			NP 253 GR
				Stone			NP 253 S
				White			NP 253 W

Copper Earth Tape

Flat PVC covered copper earthing tapes are specified mainly as down conductors on a building’s structural lightning protection system – a complete range of earth bars, connector joints, fixing clips and clamps for connecting conductor tape to copper earth rods.

Earth Tapes

Earth Tapes, Cables & Conductors – bare copper, PVC covered and LSOH (Low Smoke Zero Halogen) tapes, hard drawn copper bar and earth braids. LV-HV-EHV earthing tapes and systems for substations, transformers and generators.

Substations LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.

Substations - Cable Joints Duct Seals Cable Covers 11kV 33kV

T&D, Supporting contractors involved in MV-HV Switchgear Testing, Substation Maintenance, Cable Laying & Jointing at 11kV, 33kV & EHV

➡ Contact T&D for competitive prices and fast delivery from stock for PVC Covered Copper Earthing Tapes.

Enquire

PVC Covered Copper Earthing Tapes

PVC Covered Copper Earthing Tapes