Tinned Hard Drawn Copper Earth Bars

T&D distribute the complete range of Earth Tapes manufactured from high conductivity tinned hard drawn copper by AN Wallis in an extensive range of widths and thicknesses from 25 x 3mm (75sqmm C.S.A. Cross Section Area) to 50 x 6mm (300sqmm C.S.A.) – tinned hard drawn copper earthing bars are available in 4m lengths.

Tinned hard drawn copper earth bar conductors with fault current ratings according to BS7430 with an initial copper conductor temperature of 30°C and a maximum temperature of 250°C.

➡ Earth Rods | Copper Earth Plates | Copper Earth Mats | Copper Conductors

Tinned Hard Drawn Copper

Earthing Bars

Selection Table

The table enables the selection of hard drawn tinned earth bars when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number	Earth Bar W x H	Copper Cross Sectional Area (CSA) / Thickness	Weight Per Metre	Standard Copper Length
HDT 2503	25mm x 3mm	75sqmm	0.67kg	4m
HDT 2506	25mm x 6mm	150sqmm	1.33kg	4m
HDT 5006	50mm x 6mm	300sqmm	2.68kg	4m

Copper Earth Bars

Tinned hard drawn copper earthing bars are specified for above ground earthing conductors due to copper theft risk of insecure stranded copper conductors – a complete range of earth bars, connector joints, fixing clips and clamps for connecting conductor tape to copper earth rods.

Earth Tapes

Earth Tapes, Cables & Conductors – bare copper, PVC covered and LSOH (Low Smoke Zero Halogen) tapes, hard drawn copper bar and earth braids. LV-HV-EHV earthing tapes and systems for substations, transformers and generators.

Substations LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.