3M QT-III | Cold Shrink Terminations | Video Demonstration
Published 17 Jan 2022
High Voltage Cable Terminations
- Tight Cable Sealing – HV termination retains resiliency and pressure after prolonged aging and outdoor pollution exposure
- Flexible Cold Shrink – QT-III accommodates all power cable manufacturers bend radius tolerances and recommendations
- Reliability – high dry and wet insulation resistance for switchgear, transformer or outdoor pole termination
- Versatile – QT-III Cold Shrink terminations install quickly and accommodates a wide range of cable sizes
- Dependable – proven long-term reliability and safe operation at overload temperature on MV HV power system networks
- Time Efficient – reduced installation time for the Jointer compared to heat shrink, electrical taping or resins
- Ozone, Heat and UV Resistance – the physical characteristics of silicone rubber Cold Shrink provide excellent performance over the very wide temperature range of -150°F (-100°C) to 600°F (315°C)
Cold Shrink Reliability Record Low Failure Rates*: – 0.067% for Cold Shrink Cable Joints/Splices – 0.022% for Cold Shrink Terminations
*Data based upon U.S. failure data of U.S. manufactured 3M Cold Shrink Medium & High Voltage Cable Accessories between 2009 and 2012.
QT-III
Stocked & Supplied by Thorne & Derrick | Technical Support | Competitive Prices | UK & International Projects
From the Field – Pictured: Cold Shrink Terminations manufactured by 3M Electrical shown terminating 11kV polymeric single core power cables to be used as transformer link cables.
More from 3M Electrical
- Continuous Shearhead Bolt vs. Crimp Compression Technologies By 3M Electrical
- 3M Electrical Tapes Guide | The Tape For Every Task
- 3M Terminations | Surface Tracking on Medium Voltage Cable Terminations by 3M Electrical
- 66kV Terminations | NEW Stock Introduction for 3M Cold Shrink Cable Terminations
- Stress Control | MV Cable Terminations by 3M Electrical
- Q/ Can 3M Electrical Offer MV Cable Joints For Hazardous Areas?
- MV Cable Jointing & Some Jointers Tips Using 3M Scotch Tapes
Supplying Cable Termination, Jointing, Pull-in & Electrical Equipment up to 66kV
Thorne & Derrick distribute the most extensive range of MV HV Medium & High Voltage Cable Joints, Terminations & Connectors from manufacturers including 3M, Prysmian, Nexans Euromold, Elastimold, Pfisterer CONNEX and Shrink Polymer Systems.
Heat shrink, cold shrink, push-on and slip-over cable accessories enable the jointing, terminating and connection of 11kV-33kV and 66kV-132kV cables to oil, air or gas insulated switchgear, transformers, motors and overhead lines distributing electricity at MV HV.
MV HV High Voltage Cable Joints | Cable Terminations | Cable Connectors | Distributed from Stock | UK & Export Sales
