Klauke EKM 60 UNV Battery Powered Hydraulic Universal Tool
klauke ekm 60 unv battery powered hydraulic universal tool
Product Code: EKM60UNVCFB / EKM60UNVCFM
The Klauke EKM 60 UNV is a compact battery powered hydraulic universal tool for crimping, cutting and punching with one unit. Designed for use in confined working spaces, it delivers 60kN crimping force, accepts interchangeable accessories, and is available with either Bosch or Makita 18V battery systems.
GO TO DOWNLOADSTechnical Specifications
Key Features
Ordering Information
Applications
Operation & Safety
Product Overview
The Klauke EKM 60 UNV is a versatile battery powered hydraulic universal tool engineered that can be used as a battery powered cable crimping tool and battery operated cable cutting tools that comes with one head for crimping, cutting and punching – one tool for all applications.
The tool develops a 60kN crimping force and supports conductor sizes from 6mm² to 300mm², with a 42mm stroke and fast crimping cycle time of approximately 7 to 9 seconds depending on cross section.
For cutting duties, the EKM 60 UNV handles cable diameters up to 40mm, while punching capacity extends to 64mm round and 92 x 92mm square using the correct accessories.
Contact our technical team to request pricing, accessories and application guidance for the Klauke EKM 60 UNV battery powered hydraulic universal tool. Thorne & Derrick supply specialist crimping, cutting, punching and cable preparation tools for industrial and utility projects.
Technical Specifications
Klauke EKM 60 UNV Battery Powered Hydraulic Universal Tool
User Instructions
| Operation Stage | User Instructions |
| Battery Selection | • Confirm whether the tool version uses Bosch or Makita batteries.
• Ensure the correct charged battery is fitted before use. |
| Accessory Setup | • Fit the correct crimping die, cutting insert or punching adapter for the task.
• Check the accessory is fully seated and appropriate for the conductor, cable or panel material. |
| Tool Positioning | • Use the flip-top rotatable head to position the tool correctly.
• Ensure the workpiece is aligned before starting the operating cycle. |
| Operation | • Operate the tool using the one-button control concept.
• Allow the automatic retraction function to complete the cycle safely after crimping or cutting. |
| After Use | • Inspect battery charge and service indicators.
• Clean the tool and accessories before storing in the carrying case. |
Key Features
The Klauke EKM 60 UNV is designed to improve efficiency, reduce tool changes and support safe working across a wide range of installation tasks:
- One head for crimping, cutting and punching
- Available with Bosch or Makita battery systems
- Bluetooth-enabled data access via display and Klauke Link® app
- Universal flip-top rotatable head
- One-button operating concept for simple and safe control
- Balanced centre of gravity for easier handling
- LED work area illumination
- Automatic retraction after crimping or cutting cycle completion
- Battery charge and service display for readiness monitoring
- Compact form for confined space conditions
Ordering Information
Applications
✔ Crimping cable lugs and connectors from 6mm² to 300mm²
✔ Cutting cables and conductors up to 40mm diameter
✔ Punching panels and enclosures with compatible accessories
✔ Electrical installation and panel building work
✔ Maintenance and assembly work where one multi-function tool improves efficiency
✔ Site and workshop use, including confined or restricted access locations
OperationS & Safety
Some Fault Diagnosis Tips
| Problem | Solution |
| The tool does not start or complete a cycle. | Check battery charge level, battery seating and service indicator status. |
| Crimping or cutting performance is poor. | Verify the correct die, adapter or insert is fitted and the application is within rated capacity. |
| The head is difficult to align. | Rotate and position the flip-top universal head correctly before operation. |
| Tool data or status is unclear. | Use the onboard display or connect through the Klauke Link app via Bluetooth. |
Routine Care
- Keep the tool body, head and accessory interfaces clean and dry.
- Inspect dies, cutting inserts and punching accessories before use.
- Charge batteries only with compatible chargers.
- Store the tool in the supplied case to reduce the risk of impact damage.
- Monitor charge and service displays to keep the tool ready for use.
Note: Always use the EKM 60 UNV within the rated crimping, cutting and punching capacities and follow the manufacturer’s operating instructions.
Warnings
- Use only approved batteries, chargers, dies and adapters.
- Keep hands clear of moving and compression areas during operation.
- Do not exceed the stated crimping, cutting or punching capacities.
- Ensure the workpiece is correctly positioned before starting the cycle.
- Inspect the tool and accessories regularly for wear or damage
