Accles & Shelvoke

Accles & Shelvoke

Cable spikers & Spiking Tools 

Cable spikers manufactured by Accles & Shelvoke use cartridges which when fired drive a steel spike into MV-HV electric cables to achieve a short circuiting of the power supply and ensure the cable is “dead” (de-energised) – the medium/high voltage cable is then electrically safe and proven “dead” to conduct routine maintenance including jointing, terminating and testing.

Typical cable voltages include LV, 11kV, 33kV, 66kV, 132kV and 275kV with outside diameters up to 110mm.

For transmission and distribution cables with thicker cable insulation a heavy duty cable spiker is available – suits cables up to 150mm diameter with extra high voltages (EHV) up to 400kV.

  1. Mini Spiking Tool – Up to 75mm Diameter Cables LV MV HV
  2. Standard Spiking Tool – Up to 110mm Diameter Cables LV MV HV
  3. Heavy Duty Spiking Tool – Up to 150mm Diameter Cables EHV

Spiking HV Cables

The cable spiker tool features a remote firing procedure to provide electrical safety to the user and is suitable for spiking single and 3 core MV-HV cables with XLPE insulation (polymeric) and shielded/unshielded with steel wire armour (SWA), braid or lead sheath covered – a hydraulic cable spiking tool is also available.

Cable Spikers

Accles Cable Spikers  i) Mini Spiker up to 75mm  ii) MV-HV Spiker up to 110mm iii) EHV Spiker up to 150mm iv) Jack

ACCLES & SHELVOKE – DISTRIBUTORS, STOCKISTS & SUPPLIERS

Thorne & Derrick provide competitive prices and fast delivery from stock for the complete range of cable spiking and jointing tools.

View the complete Accles & Shelvoke tool ranges for shorting LV-HV cables  ➡

T&D - SPIKE ♦ CABLE ♦ JOINT ♦ TERMINATE ♦ CONNECT ♦ GLAND ♦ CLEAT ♦ CRIMP ♦ DUCT ♦ SEAL ♦ REPAIR ♦ LV MV HV 11KV 33KV