Slingco

Cable Socks

Slingco cable socks (or cable grips) for pulling and laying power, telecom, fibre optic, subsea and umbilical cables into trench, duct or stringing onto overhead line towers – this includes single eye, double eye, open ended and lace-up type cable socks.

Cable Sock Grips & Line Pulling Supports For Power Utilities

Slingco Cable Pulling Socks

MV HV Power Cables – Transmission & Distribution

Thorne & Derrick distribute the complete range of Cable Pulling Products to support safe installation of LV, MV & HV cables into underground ducts, conduits and trenches by cable pulling, laying and jointing contractors.

Slingco cable socks are manufactured from high tensile galvanized or stainless steel wire rope or aramid for high strength, corrosion resistant and durable support – the cable socks exert maximum grip onto the outer cable sheath.

♦ Note – when selecting cable socks check the working load of the cable does not exceed design load of the sock.

Subject to special order customised cable socks can be produced with longer length, larger diameters (up to 1050mm) and breaking strains exceeding 120,000lbs.

Cable Socks – Pulling Underground Cables & Stringing Overhead Conductors LV MV HV

Subsea Cable Support & Pulling

Cable socks are used to support offshore and subsea cable laying operations on wind farm projects – this includes medium and high voltage submarine power cables with XLPE, EPR and paper-oil insulation operating at 33kV, 66kV/72kV, 110kV and 220kV.

Rollers | Jacks | Winches | Rods | Towers | Trailers | Cable Drum Handling & Support Products

Cable Support Socks – Subsea Umbilicals, Inter-Array Cable & Power Cables. Image: JDR

Slingco – Distributors, Stockists & Suppliers

Thorne & Derrick provide competitive prices and fast delivery from stock for the complete range of cable socks manufactured by Slingco.

View the complete range of Slingco cable socks  ➡

T&D - CABLE ♦ JOINT ♦ TERMINATE ♦ CONNECT ♦ SUPPORT ♦ GRIP ♦ CRIMP ♦ DUCT ♦ SEAL ♦ REPAIR ♦ LV MV HV 11KV 33KV