Nexans SRDF Heat Shrink Termination | XLPE Outdoor 3 Core 12kV 24kV 36kV MV Cables

Published 05 Dec 2018

11kV Termination - Single Core XLPE EPR Heat Shrink Cable Terminations

Cable Terminations 11kV 33kV | Single & 3 Core | Medium & High Voltage Cables MV HV

Cable Terminations

Nexans SRDF are 3 core heat shrink cable terminations for use outdoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12) kV
  • 6.35/11 (12) kV
  • 8.7/15 (17.5) kV
  • 12/20 (24) kV
  • 12.7/22 (24) kV
  • 18/30 (36) kV
  • 19/33 (36) kV

Heat shrinkable 11kV-33kV Nexans 3-core termination kits, suitable for medium voltage polymeric (XLPE EPR) insulated cables within an outdoor environment.

11kV Terminations 3 Core XLPE EPR Heat Shrink Cable Terminations

11kV Terminations 3 Core XLPE EPR Heat Shrink Cable Terminations

11kV Terminations 3 Core Cables
  1. Cable Lugs (Cembre Crimp Lugs or Pfisterer Sicon Mechanical Lugs)
  2. Water Sealing Mastic
  3. Anti Tracking Heat Shrink Tube (Red)
  4. Anti Tracking Sheds (outdoor terminations only)
  5. Stress Control Heat-Shrinkable Tube (Black)
  6. Stress Control Mastic
  7. 3 Core Heat Shrink Cable Break-out

Nexans SRDF Heat SHRINK TERMINATION SPECIFICATION

The following tables enable the selection of indoor cable terminations using Heat Shrinkable technology manufactured by Nexans:

Nexans Order Code  Cable Voltage  Conductor Range – 3 Core Cables  Cable Termination Tails
SRDF 12 35-95  11kV  35, 50, 70 95sqmm  650mm
SRDF 12 120-240  11kV  120, 150, 185, 240sqmm  650mm
SRDF 12 240-400  11kV  240, 300, 400sqmm  650mm

 

Nexans

Thorne & Derrick distribute the complete range of medium/high voltage electrical equipment manufactured by Nexans – this includes Euromold bushings for use with oil fluid or gas insulated switchgear or transformers and associated screened separable connectors according to both IEC (Euromold) and IEEE (Elastimold) for the termination, connect+disconnect of MV-HV cables onto power distribution systems. To protect power systems against high voltage surges resulting from lightning or switching a complete range of surge arresters are available to be used with Euromold connectors in 11kV/12kV, 24kV and 33kV/36kV voltage classes.

Nexans Joints Connectors Terminations

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

 ➡ Read: Thorne & Derrick Announce Distribution Agreement & Contract With Nexans 

Thorne & Derrick International

 

Further Reading