Hydraulic Punching Tool | Klauke LS 100 FLEX BATTERY Powered

Hydraulic Punching Tool | Klauke LS 100 FLEX BATTERY Powered
Hydraulic Punching Tool
The Klauke LS 100 FLEX is a battery powered hydraulic punching tool with a highly flexible rotating head and an integrated pressure sensor which increases the service life of the hole punch.
The Klauke LS 100 FLEX has an automatic stop allowing the punching tools to last longer.
➡ See also: Battery Operated Cable Cutting Tools | Battery Powered Cable Crimping Tool
Klauke LS 100 Hydraulic Punching Tool Features
- Choose your battery system: Bosch or Makita
- All data can be easily read via Bluetooth
- Balanced centre of gravity for easy handling and effortless operations
- LED for work area illumination
- Energy saving function with motor cut-out after successful operation
- Manual retract as required
- Always ready-to-use thanks to battery charge and service display

Klauke LS 50 FLEX
Technical Specification
The following table outlines the performance specification of the Klauke LS 100 FLEX punching tool:
BOSCH BATTERY SYSTEM
Punching force | 60 |
Weight | 2.7 |
Punching tool battery voltage | 18 |
Battery capacity | 5 Ah, Li-Ion |
Battery charging time | 15 |
Punching time | 5 s for Ø 22.5 mm, 3 mm St37, 6 s for Ø 63.5 mm, 3 mm St37 |
Ambient temperature | -15° C up to +40° C |
Dimensions | 340 x 115 x 80 |
Punching capacity | St37 max.: 104.8 mm for a material thickness of 2.5 mm, V2A max.: 50.8 mm for a material thickness of 2.5 mm |
MAKITA BATTERY SYSTEM
Punching force | 100 |
Weight | 2.7 |
Punching tool battery voltage | 18 |
Battery capacity | 4.0 Ah, Li-Ion |
Battery charging time | 15 |
Punching time | 5 s for Ø 22.5 mm, 3 mm St37, 6 s for Ø 63.5 mm, 3 mm St37 |
Ambient temperature | -15° C up to +40° C |
Dimensions | 340 x 115 x 80 |
Punching capacity | St37 max.: 104.8 mm for a material thickness of 2.5 mm, V2A max.: 50.8 mm for a material thickness of 2.5 mm |

Hydraulic Punching Tool | Klauke LS 100 FLEX BATTERY Powered
CABLE TOOLS
Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.
Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.

View the complete range of Cable Crimping & Cable Cutting Tools