Cold Shrink 3 Core Outdoor Cable Terminations 11kV 24kV Euromold T-OTK

Cold Shrink 3 Core Outdoor Cable Terminations 11kV 24kV Euromold T-OTK

Cable Termination | Cold Shrink | 3 Core | 11kV 24kV

Euromold T-OTK are 3 core cold shrink cable terminations for use outdoor and specified to terminate and connect medium/high voltage cables in the following voltage classes:

  • 6/10 (12) kV
  • 6.35/11 (12) kV
  • 8.7/15 (17.5) kV
  • 12/20 (24) kV
  • 12.7/22 (24) kV

Euromold T-IT cold shrink terminations for use oudoors and suited for polymeric insulated three-core cables – providing a necessary seal against moisture penetration and a perfect electrical field control

  • Voltage Classes – 11kV 12kV 24kV Maximum
  • Terminate & Connect Cables – Polymeric XLPE EPR
  • Single or 3 Core – 3 Core
  • Cable Screen – Suit Both Copper Wire & Copper Tape Screen (Order Euromold MT Kit)
  • Location – Ourdoor Cable Termination
  • Conductor Cross Section Sizes – 50-400sqmm
  • Applications – MV HV Switchgear, Transformers, Motors
  • Also Indoor Cold Shrink Terminations 11kV 24kV

➡ See complete range of Nexans Euromold Cable Terminations

Euromold T-OTK cold shrink termination Specification

Euromold Termination
Cold Shrink 
Voltage
Um
(kV)
Diameter Over
Core Insulation
Dia. d (mm)
Diameter Over
Outer Sheath
Dia. D (mm)
Conductor Sizes (sqmm)
minmaxminmaxminmax
T-OTK 12-112kV1630489050240
T-OTK 12-212kV264268110240400
T-OTK 24-124kV1630489025185
T-OTK 24-224kV264268110150240
Cold Shrink 3 Core Outdoor Cable Terminations 11kV 24kV Euromold T-OTK - Design

Cold Shrink 3 Core Outdoor Cable Terminations 11kV 24kV Euromold T-OTK – Design

Outdoor cold shrink cable termination kit list comprising:

  1. Cable lug (not included in the standard kit)
  2. Water sealing mastic
  3. Silicone rubber tubes with sheds
  4. Silicone rubber tubes
  5. Stress control mastic
  6. Conductive EPDM ring
  7. Silicone rubber protection tubes
  8. Break-out
  9. Flexible tinned copper braid for use with individual metal tape screened cables)

EUROMOLD T-OTK selection table

For OUTdoor MV HV Cable Terminations

Select the Euromold part number corresponding to both the system voltage and the cable insulation diameter in mm.

The termination kit comprises of a roll of adhesive tape, flexible copper braid and installation instructions.

Kit Contents For Euromold T-OTK Terminations

Kit Contents For Euromold T-OTK Terminations

 

Euromold Termination
Cold Shrink 
Voltage
Um
(kV)
Diameter Over
Core Insulation (mm)
Conductor Sizes (sqmm)
minmaxminmax
T-OTK 12-112kV163050240
T-OTK 12-212kV2642240400
T-OTK 24-124kV163025185
T-OTK 24-224kV2642150240

Euromold ITK - Cable Lugs

All commercialised European standard cable lugs can be used.

Euromold

Euromold | Connect | Joint | Terminate MV HV Cables – view our complete range of HV Joints & Terminations in heat shrink, cold shrink, push-on and plug-in versions for medium/high voltage cables.

Data Sheets