Low Voltage LV Industrial Cable Joints – Prysmian JUJCC

Low Voltage LV Industrial Cable Joints – Prysmian JUJCC
Prysmian JUJCC industrial straight cable joints are used for LV cables with copper conductors ranging from 1.5sqmm to 400sqmm and have transparent injection moulded polypropylene shells up to size 4 and vacuum formed clear HIPS for the larger sizes.
JUJCC low voltage cable joints include low hazard isocynate free JEM resin which has extremely low viscosity and enhanced adhesion and are designed to allow use with compression connectors.
T&D can offer the full range of Prysmian cable joints for low voltage industrial cable jointing applications.
Prysmian JUJCC Cable Joints
Technical Data
- Low Voltage Straight Joints for 600/1000 Volt polymeric insulated copper conductors, SWA cables to BS5467, BS6346 and IEC 502.
- Tested & Approved to BS EN 50393 & ENA ER C81
- Includes 4 compression connectors and constant force spring Armour Bonds.
Prysmian JEM Resin Features & Benefits
- Easier resin mixing by the cable jointer in “Twin Pack” totally enclosed mixing in a clear laminate sachet.
- Extremely low mix viscosity allows void free cable joint filling.
- JEM Resin is insensitive to moisture and will cure under water.
- Enhanced adhesion to XLPE, MDPE, PVC & lead covered cables.
- High flash point, non-flammable liquid – no special storage or transport requirements.
- Not classified as irritating to the skin or eyes.
- Does not cause skin sensitisation.
CABLE JOINTS Dimensions
Prysmian Cable Joint Reference | Dimensions | |||
Minimal Box Entry ∅ (A) | Maximum Box Entry ∅ (B) | Box Length (C) | Internal ∅ (D) | |
JUJ2CC | 12mm | 26mm | 185mm | 35mm |
JUJ6CC / JUJ10CC | 14mm | 32mm | 245mm | 48mm |
JUJ16CC | 23mm | 39mm | 325mm | 52mm |
JUJ25CC / JUJ35CC | 28mm | 50mm | 375mm | 68mm |
JUJ50CC / JUJ70CC / JUJ95CC | 32mm | 58mm | 520mm | 102mm |
JUJ120CC / JUJ150CC / JUJ185CC | 45mm | 75mm | 705mm | 124mm |
JUJ240CC / JUJ300CC | 40mm | 89mm | 862mm | 140mm |
JUJ400CC | 57mm | 95mm | 900mm | 150mm |
➡ Prysmian Cable LV MV HV Accessories | Cable Glands | Cable Cleats | 11kV Terminations Heat Shrink

Prysmian JUJCC LV Cable Joints – Dimensions
LOW VOLTAGE CABLE JOINTS Selection Table
Nominal Area of Conductor | Two Core Ref | Three Core Ref | Four Core Ref |
1.5sqmm | JUJ2CC | JUJ2CC | JUJ2CC |
2.5sqmm | JUJ2CC | JUJ2CC | JUJ2CC |
4sqmm | JUJ2CC | JUJ2CC | JUJ2CC |
6sqmm | JUJ6CC | JUJ6CC | JUJ6CC |
10sqmm | JUJ10CC | JUJ10CC | JUJ10CC |
16sqmm | JUJ16CC | JUJ16CC | JUJ16CC |
25sqmm | JUJ25CC | JUJ25CC | JUJ25CC |
35sqmm | JUJ35CC | JUJ35CC | JUJ35CC |
50sqmm | JUJ50CC | JUJ50CC | JUJ50CC |
70sqmm | JUJ70CC | JUJ70CC | JUJ70CC |
95sqmm | JUJ95CC | JUJ95CC | JUJ95CC |
120sqmm | JUJ120CC | JUJ120CC | JUJ120CC |
150sqmm | JUJ150CC | JUJ150CC | JUJ150CC |
185sqmm | JUJ185CC | JUJ185CC | JUJ185CC |
240sqmm | JUJ240CC | JUJ240CC | JUJ240CC |
300sqmm | JUJ300CC | JUJ300CC | JUJ300CC |
400sqmm* | JUJ400CC | JUJ400CC | JUJ400CC |
*Joint does not accommodate crossed core (phase to phase) jointing.
➡ For jointing all types of XLPE, EPR and PILC power, control and instrumentation cables in straight, branch or transition arrangement including zero halogen, fire resistant and hazardous areas see Resin Cable Joints