Thorne & Derrick’s POWER Blog is regularly updated with news, projects, videos, technical tips, training information, promotions, webinars, career opportunities and white papers.
➡ View T&D’s brochure – contact our Sales Team with your requirements.
We focus on Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV
We provide guidance and technical support for the installation of LV, MV & HV Cable Joints, Terminations, Substation & Electrical Equipment from our Key Suppliers including:
With Photo Blog contributions from our social network of utility professionals, linesmen and cable jointers working on MV HV EHV cables and overhead lines typically at 11kV, 33kV, 66kV and up to 132kV.
JOINT ♦ TERMINATE ♦ CONNECT ♦ GLAND ♦ CLEAT ♦ CRIMP ♦ DUCT ♦ SEAL ♦ REPAIR ♦ CABLE ♦ SPLICE ♦ INSULATE
You are currently filtering by: Cable Joints & Terminations HV
Published 03 Jul 2020
BundGuards Substation & Transformer Oil Spills & Leaks Containment The Andel BundGuard system was first conceived and developed in 1992 as a direct response to the needs of the UK electricity industry and the serious water-removal problems it faced at sub-station sites across the UK. Since then many thousands...
Published 30 Jun 2020
uploaded by Chris Dodds - Thorne & Derrick Sales & Marketing Manager Substations – What’s The Risk? Explosive Flammable Gases/Vapours UK DNO’s detail safe working procedures and rules in their Document Manuals to be followed when working on alkaline or acid substation batteries and storage rooms located within primary...
Published 23 Apr 2020
Electrical Heating uploaded by Chris Dodds | Sales & Marketing Manager with Thorne & Derrick International Electric heaters forming part of the Electric Heater Schedule for the development and construction of Onshore and Offshore Wind Farms are generally located within the battery room section of medium/high voltage substations and...
Published 21 Apr 2020
The following Access Chamber test, performed by Cubis, has taken place in order to determine which Chamber Access method performs the best and can be installed the fastest – the time trial provides a comparison between conventional brick built and modern technology modular style access chambers. access Chamber Testing...
Published 16 Mar 2020
Uploaded by Chris Dodds - Sales & Marketing Manager with Thorne & Derrick International Nexans Connectors Euromold Connectors Nexans Euromold screened separable connectors for terminating medium voltage (MV) polymeric cables onto switchgear and transformer bushings are made from EPDM rubber – EPDM is a terpolymer of ethylene, propylene and a...