Guaranteed Stable Cables Using Vicera Stands for HV Cable Connections
Published 02 Jun 2023

Vicera Cable Stand Products | Supplied in the UK & Europe by Thorne & Derrick
Approved by & Used by Nexans | NKT | Ensto | Prysmian Group | TE Tyco
uploaded by Chris Dodds | Sales & Marketing Manager at Thorne & Derrick International
Thorne & Derrick are now Official Distributors for the Vicera range of Cable Jointing Stands – the introduction of this new product range is an excellent extension to our core ranges of Cable Jointing, Pulling Equipment & Preparation Tooling and we look forward to further supporting efficient, easier and more reliable power cable installations.
The Vicera range of Cable Stands are for both field or training centre use and provide safe and stable support of Low, Medium & High Voltage Cables – the cable stands are suitable for cable diameters 18-90mm with adjustable height.
The Cable Joint Stands feature stepless lateral and tilt adjustment and high strength clamps to prevent cable slippage or movement while jointing – secure and balanced cables when Jointers are undertaking highly skill-sensitive cable preparation prevents inadvertent damage to cables and future potential O&M reliability.
The cable support stands are rugged and durable for outdoor use in joint bays and trenches in all ground terrain conditions – this includes the support of 11kV/33kV/66kV cables to enable precise cable preparation by the Jointer prior to installation of joints, terminations or connectors on medium/high voltage power cables.
The Jointing Stands are used in the field to enable the completion of pole-top style outdoor terminations and also indoor substation Jointing & Termination installations.
APU2.0 Cable Stand | more info
Provides support and stability for LV HV Cables Ø 18–90mm
- Length: 180mm
Width: 730mm
Height: 720mm
Weight: 17kg - Very wide adjustment options
- Installation height 10” 57” / 25 cm 145 cm
- Sturdy clamps where the cables will stay in place
- Stepless lateral and tilt adjustment in clamps
- Suitable for all cables with an outer diameter of 5/8” 3,5” / 18mm – 90mm
- Suitable for almost any terrain
- Better ergonomics when jointing and terminating cables
- More efficient and easier to achieve best quality
- Risk minimisation during the preparation, jointing and termination of MV HV cables

Image | JK Jointing Ltd
Pictured | Vicera APU2.0 | Here the APU2.0 is shown supporting 33kV BS7870 XLPE Copper Wire Screen single core 1000sqmm cables.
£590.00 + VAT + Delivery
Quantity Discount Available
Product Review

Pictured | Cable stand manufactured by Vicera providing support and stability to medium voltage cables undergoing the termination, connection and installation of Nexans Euromold type P909TB/G screened separable connectors.
💡 Bart Baeyens (Nexans Technical Customer Manager) – “the cable stands provide the necessary stable position to prepare any cable without issues, thanks to the weight and clever design. You can easily adjust height and position resulting on a comfortable position in every situation.”
Pictured | The Vicera APU2.0 Cable Jointing Stand in place at the PFISTERER UK Training facility in the UK. Working alongside PFISTERER we can also assist in the CONNEX & SEANEX Certification of Jointers to support competency of workmanship and safeguard the integrity of medium/high voltage power cable systems across all industries – their UK Jointer Training facility is a global Centre of Excellence for Competency Certification up to 245kV.
Safe & Secure Cables with Vicera
Thorne & Derrick distribute the most extensive range of MV HV Medium & High Voltage Cable Joints, Terminations & Connectors from manufacturers including 3M, Prysmian, Nexans Euromold, Elastimold, Pfisterer CONNEX & SEANEX.
We stock Heat shrink, Cold shrink, Push-on and Slip-over cable accessories enable the jointing, terminating and connection of 11kV-33kV-66kV cables to oil, air or gas insulated switchgear, transformers, motors and overhead lines distributing MV HV electricity.
Thorne & Derrick also supply from stock Jointing Tools to enable the Cutting, Crimping & Preparation of all onshore and offshore LV MV HV Cables – this includes the removal of sheath/jacket, screen, insulation and precision engineered procedures of the cable preparation process including chamfering, bevelling, grooving and shaving.

MV HV High Voltage Cable Joints | Cable Terminations | Cable Connectors | Distributed from Stock | UK & Export Sales
Further Reading
-
Cable Joint Termination Stands for Medium High Voltage Cables Size: 102.24 KB