Panduit | Video Library

Panduit Heat Trace Wave-Ty | Heat Trace Installation System

Panduit | Powering & Protecting Cables & Infrastructure

Panduit Heat Trace Installation System

Panduit working with Thorne & Derrick, their solution for electric heat trace cable installation utilizes the Panduit Heat Trace Wave-TyTM as a part of the installation process.

Panduit’s Heat Trace Solution is for use in the installation of Mineral Insulated Electric Heat Trace (MIEHT) and eliminates some of the key problems with tie wire, mainly safety concerns and damaging of the MIEHT.

By using electric heat trace ties specifically sized for common industrial pipes, this approach allows the installer to quickly and safely install EHT in about one third of the time as typical tie wire.

Thorne & Derrick | Distributors

Network Infrastructure & Industrial Electrical Wiring

Should you require customer service, specification support or a competitive quotation please do not hesitate to contact us – extensive range of Cable Accessories, Protection & Management products available for LV MV HV Electrical Infrastructure projects in commercial, industrial and hazardous area sectors.

Wiring Duct | Cable Terminals | Absence of Voltage Testing | Cable Cleats | Cable Identification | Cable Ties | Abrasion Protection & Heat Shrink | LV HV Cable Accessories | Lockout Tagout | Stainless Steel Cable Ties & Identification | Panel Systems | Grounding Connectors | Contact us for Further Information

Productivity, Reliability, Safety 

Panduit Heat Trace Wave Ty makes installation of electrical heat trace quicker and easier and significantly reduces the risk of injury due to puncture and repetitive motion.

Suitable for the following applications:

• Oil & Gas
• Liquid Natural Gas (LNG)
• Chemical Manufacturing
• & other heavy industries

Primary application for mineral insulated heat trace is process temperature maintenance & freeze protection commonly installed with tie wire.

Panduit heat trave Wave Ty is faster to install by 2-3x than conventional tie wire.

Wave Ty has several key safety features rounded edges, recessed cut off and no exposed cut off (no hazards). Also no twisting or pulling which reduces the risk of RSI & CTS injury.

Installation tools include Panduit ST4MT, ST2MT & RT2HT.

Panduit ST4MT – new installation tool specifically designed for heat trace Wave Ty with a built in cutting lever for recessed cut off.

Panduit  ST2MT – installation tool is used with standard extra heavy ty with manual tensioning controlled by the operator and uses a twist cut mechanism.

Panduit  RT2HT – manual installation tool with side entry and feeding making it suitable for use with the extra heavy wave ty.

The heat trace Wave Ty packaging makes the product easy to handle and reduces the amount of waste on site.

Cleats | Protection for LV MV HV Power Cables

Verisafe is an electrical safety product manufactured by Panduit that automatically isolates electrical control panels and distribution boards

Thorne & Derrick are Specialist Distributors to the UK and international Offshore Wind & Renewable industry to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.

Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Panduit GS4MT-E Stainless Steel Cable Tie Installation Tool

Panduit | Powering & Protecting Cables & Infrastructure

Stainless Steel Cable Tie Installation Tool

Panduit GS4MT-E

Panduit GS4MT-E Stainless Steel Cable Tie hand tool provides higher performance and reliability. With the state-of-the-art ergonomic features which provide lower grip force lowering the risk of motion injuries to installers.

The easy to read tension settings improves accuracy while increasing dependability when installing cable ties manufactured from stainless steel.

The tension setting knob is easy to read and design in ½ stop increments to improve efficiency and a long, narrow nose to improve access to small, confined areas.

Thorne & Derrick | Distributors

Network Infrastructure & Industrial Electrical Wiring

Should you require customer service, specification support or a competitive quotation please do not hesitate to contact us – extensive range of Cable Accessories, Protection & Management products available for LV MV HV Electrical Infrastructure projects in commercial, industrial and hazardous area sectors.

Wiring Duct | Cable Terminals | Absence of Voltage Testing | Cable Cleats | Cable Identification | Cable Ties | Abrasion Protection & Heat Shrink | LV HV Cable Accessories | Lockout Tagout | Stainless Steel Cable Ties & Identification | Panel Systems | Grounding Connectors | Contact us for Further Information

The Panduit GS4MT-E Stainless Steel Cable Tie hand tool has many features that improve performance and reliability including:

• Slip proof soft handle at the rear to improve grip
• Leverage strength of all fingers when engaging the trigger
• Ergonomic design provides lower grip force lessening impact to the installer’s hand
• Easy to read tension setting label that improves accuracy and increases dependability
• Half stop tension increments that simplifies the tension setting process
• Beveled tie entry speeds installation with quick side entry of a tie into the tool
• Long narrow nose improves access to confined areas

Panduit GS4MT-E tool installs standard (200 LBS), light-heavy (250 LBS), heavy (450 LBS) cross section metal locking cable ties.

Cleats | Protection for LV MV HV Power Cables

Verisafe is an electrical safety product manufactured by Panduit that automatically isolates electrical control panels and distribution boards

Thorne & Derrick are Specialist Distributors to the UK and international industries to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.

Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Panduit Compression Direct Burial Grounding System vs. Exothermic

Panduit Direct Burial Grounding System

Direct Burial Grounding System

Panduit Compression

Panduit working with Thorne & Derrick, their UK Distributor, have the StructuredGround™ Direct Burial Compression Grounding System which provides the highest performance and most reliable compression connection in the industry.

Panduit Grounding & Bonding systems provide high quality, visually verifiable connections and dedicated grounding paths to maintain system performance and protect personnel and equipment. Our power and grounding systems meet or exceed regulatory standards and have the performance and application range to address your most demanding requirements.

Thorne & Derrick | Distributors

Network Infrastructure & Industrial Electrical Wiring

Should you require customer service, specification support or a competitive quotation please do not hesitate to contact us – extensive range of Cable Accessories, Protection & Management products available for LV MV HV Electrical Infrastructure projects in commercial, industrial and hazardous area sectors.

Wiring Duct | Cable Terminals | Absence of Voltage Testing | Cable Cleats | Cable Identification | Cable Ties | Abrasion Protection & Heat Shrink | LV HV Cable Accessories | Lockout Tagout | Stainless Steel Cable Ties & Identification | Panel Systems | Grounding Connectors | Contact us for Further Information

Brendan Hass, Product Manager of Grounding & Bonding Solutions at Panduit describes the dangers of an exothermic welding systems and says that they are often overlooked due to complacency or lack of education about the direct burial process. At Panduit have specifically engineered structured ground lines to increase installation efficiency, connection reliability and job site safety.

Exothermic systems are both physically and logistically awkward to use as the moulds can only be used with a specific connection type and often the complexity of the project increases the amount and types of moulds required. The versatility and wide range of capabilities of the Panduit Compression System allow for easy use and maintenance.

The efficiency has also been tested installing 4 times faster than exothermic, no delays due to hot work permits or inclement weather and the cable tie turns a 2 man job into a 1 man job. The most common concern about compression is the reliability. Panduit Compression has gone through rigorous testing including IEEE standard 837, MIL-STD-202G and patented anti-oxidant compound.

With Panduit safety comes first with all tools certified with the following UL 467 listed, no hot work permits increases jobsite safety and easy consistent inspection (scratch no-flame design) making it easy to identify.

Cleats | Protection for LV MV HV Power Cables

Verisafe is an electrical safety product manufactured by Panduit that automatically isolates electrical control panels and distribution boards

Thorne & Derrick are Specialist Distributors to the UK and international industries to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.

Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Panduit Oil & Gas Infrastructure Solutions for Harsh & Hazardous Areas

Panduit | Powering & Protecting Cables & Infrastructure

Oil & Gas solutions by panduit

Panduit working with Thorne & Derrick, their UK Distributor, have the proven oil and gas solutions, along with supply chain and engineering guidance you need to design and build in Oil & Gas environments.

Oil and gas infrastructure solutions from Panduit can help you minimise downtime, improve operational performance, and compress installation times.

Panduit partners with producers seeking to identify new technologies to handle remote environments, integrate new capabilities, and meet updated safety protocols.

Thorne & Derrick | Distributors

Network Infrastructure & Industrial Electrical Wiring

Should you require customer service, specification support or a competitive quotation please do not hesitate to contact us – extensive range of Cable Accessories, Protection & Management products available for LV MV HV Electrical Infrastructure projects in commercial, industrial and hazardous area sectors.

Wiring Duct | Cable Terminals | Absence of Voltage Testing | Cable Cleats | Cable Identification | Cable Ties | Abrasion Protection & Heat Shrink | LV HV Cable Accessories | Lockout Tagout | Stainless Steel Cable Ties & Identification | Panel Systems | Grounding Connectors | Contact us for Further Information

Energy producers in the oil and gas industry look for partners who can help them keep up with changing business conditions & goals including wear and tear from extreme weather conditions in remote locations that affect system reliability and could cause long-term damage. Safety on the plant floor, maximised productivity, space optimisation & reduced installation speeds are all industry challenges and priorities.

Panduit’s solutions are designed for enhanced safety, optimised installation & preventive maintenance in the harsh environments where refineries operate.

Cleats | Protection for LV MV HV Power Cables

Verisafe is an electrical safety product manufactured by Panduit that automatically isolates electrical control panels and distribution boards

Thorne & Derrick are Specialist Distributors to the UK and international Oil & Gas industry to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.

Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV 

Panduit Infrastructure Solutions for Renewable Energy Facilities

Panduit | Powering & Protecting Cables & Infrastructure

Renewable Energy solutions by panduit

Panduit working with Thorne & Derrick, their UK Distributor, have the proven renewable energy solutions, along with supply chain and engineering guidance you need to design and build best-in-class solar and wind environments.

Renewable energy electrical infrastructure solutions play a vital role in the world’s top renewable energy production facilities.

Panduit rigorously tests all solar and wind equipment to ensure outstanding performance in high wind and high vibration operations, under intense UV exposure, in extreme temperatures, and in the presence of corrosive agents.

Thorne & Derrick | Distributors

Network Infrastructure & Industrial Electrical Wiring

Should you require customer service, specification support or a competitive quotation please do not hesitate to contact us – extensive range of Cable Accessories, Protection & Management products available for LV MV HV Electrical Infrastructure projects in commercial, industrial and hazardous area sectors.

Wiring Duct | Cable Terminals | Absence of Voltage Testing | Cable Cleats | Cable Identification | Cable Ties | Abrasion Protection & Heat Shrink | LV HV Cable Accessories | Lockout Tagout | Stainless Steel Cable Ties & Identification | Panel Systems | Grounding Connectors | Contact us for Further Information

Today’s new energy sources are often located in harsh environments or remote locations.

Therefore product reliability, installation speeds & safety are critical to successful operations. Panduit’s products provide maximum performance under extreme conditions including heat, cold, vibration, corrosive agents and high winds. The uniquely engineered solutions are designed for applications across project’s life cycle enabling customers to minimise installation and repair times while maximising safety and uptime.

Cleats | Protection for LV MV HV Power Cables

Verisafe is an electrical safety product manufactured by Panduit that automatically isolates electrical control panels and distribution boards

Thorne & Derrick are Specialist Distributors to the UK and international Offshore Wind & Renewable industry to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.

Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.

Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HV