Greenlee LS50 | FLEX BATTERY Powered Hydraulic Punching Tool

Greenlee LS50

Hydraulic Punching Tool

Battery Powered Hydraulic Punching Tools

The Greenlee LS50 FLEX distributed by Thorne & Derrick is a battery powered hydraulic punching tool with a highly flexible rotating head and an integrated pressure sensor which increases the service life of the hole punch.

The Greenlee LS50 FLEX has an automatic stop allowing the punching tools to last longer – the Greenlee LS50 tool works with a wide variety of knockout punches, including Greenlee Slug Buster and Slug Splitter and is compatible for punching both ST37 low carbon steel and V2A stainless steel. This hydraulic punch tool has a high flexibility due to its 360° rotating head. This compact and ergonomic design allows for the operation of knockout punches in confined and hard to reach areas. The Greenlee LS50 tooling has a punch force with LED light for illumination of the work area.

The Greenlee tool features an 18V lithium-ion (1.5Ah) Makita Battery, allowing long operating times and short recharging times for enhanced efficiency – the tool provides versatile and reliable punching for both carbon and stainless steel:

Suitable for Hole punching

Steel Type	Maximum Punch Tool Capacity
St37 low carbon steel	104.8mm diameter at a maximum thickness of 2.5mm
V2A stainless steel	50.8mm diameter at a maximum thickness of 2.5mm

➡ See also: Battery Operated Cable Cutting Tools | Battery Powered Cable Crimping Tool

Greenlee Punching Tools | This Lithium Ion battery operated hydraulic punch driver provides a huge variety of punching applications for a range of material such as mild steel and stainless steel. Its compact, ergonomic design and rotating flexible aluminium head is ideal for use in confined and difficult areas. Compatible with all Greenlee punching tools, the LS50FLEX boasts a long life expectancy due to the automatic stop which prevents damage to the driver. An integrated pressure sensor increases the service life of the hole punch.

The Greenlee LS50 hydraulic punching tool is supplied complete with a compact and durable carrying case to prevent product loss or damage on site or in the workshop.

Greenlee LS50

Hydraulic Punching Tool Features

Choose your battery system: Bosch or Makita
All data can be easily read via Bluetooth
Balanced centre of gravity for easy handling and effortless operations
LED for work area illumination
Energy saving function with motor cut-out after successful operation
Manual retract with Greenlee LS50 FLEX as required
Always ready-to-use due to battery charge and service display of the tool

Greenlee LS50 FLEX

tOOL Technical Specification

The following table outlines the performance specification of the Greenlee LS50 FLEX punching tool:

BOSCH BATTERY SYSTEM

Punching tool force	60kN
Weight	2.1kg
Punching tool battery voltage	18V
Battery capacity	2 Ah, Li-Ion
Battery charging time	15 minutes
Punching time for 22.5mm	5 seconds for St37 steel, which is 3mm thick
Punching time for 63.5mm	6 seconds for St37 steel, which is 3mm thick
Ambient temperature	-15° C up to +40° C
Dimensions	340mm x 115mm x 80mm
Punching tool capacity	St37 max.: 104.8 mm for a material thickness of 2.5 mm, V2A max.: 50.8 mm for a material thickness of 2.5 mm

MAKITA BATTERY SYSTEM

Punching tool force	60KN
Weight	2.1kg
Punching tool battery voltage	18V
Battery capacity	1.5 Ah, Li-Ion
Battery charging time	15 minutes
Punching time for 22.5mm	5 seconds for St37 steel, which is 3mm thick
Punching time for 63.5mm	6 seconds for St37 steel, which is 3mm thick
Ambient temperature	-15° C up to +40° C
Dimensions	340mm x 115mm x 80mm
Punching tool capacity	St37 max.: 104.8 mm for a material thickness of 2.5 mm, V2A max.: 50.8 mm for a material thickness of 2.5 mm

Hydraulic Punching Tool | Greenlee LS 50 FLEX BATTERY Powered

Electrical Installation Tools | Tools, Knockouts, Wire and Cable Fishing/Pulling/Termination, Bending, Electrical Test and Measurement from Greenlee. Greenlee’s products are designed to increase productivity and help complete jobs safely, consistently and reliably. In 1996, Klauke expanded its cable tooling product portfolio with the inclusion of the Greenlee brand. This placed a focus on punching tools and cable management to complement the Klauke range of Cutting & Crimping Tools

CABLE TOOLS

Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.

Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.