LHS Premium Ladder Heatshrink Cable Labels – Silver Fox Legend
Heat Shrink Cable Labels
Premium Ladder Heatshrink Cable Labels
Silver Fox Legend™ LHS Premium Ladder Heatshrink Cable Labels are manufactured to offer a consistently high-grade heatshrink solution. It also has a 3:1 shrink ratio.
The key benefit of the Legend™ Premium Heatshrink is the ladder-style function that enables the user to easily remove the required cable labels from the carrier while the structure remains. Print in conjunction with the Silver Fox DTP-1/300 Plug’N’Play thermal printer with the same ribbon as all the Silver Fox other thermal cable labels.
A common question asked is whether the print will shrink when the tubing shrinks.
Like all heatshrink cable labels this will occur however Silver Fox have a few suggestions to try and minimise the reduction in the print size:
- Shrink the tubing from the reverse side to the printing
- Some customers also advise using a font like Arial Narrow
Cable Label Testing
This cable label has been successfully tested for High/Low Temperature, Salt Mist Spray according to Lloyds Register Type Approval System. Although not designed as an external label, it has also been successfully tested for 3000 hours accelerated UV ageing.
|UV Weathering||ISO 4982 Part 3 Method A Cycle 1 – 3000 hrs|
|Elevated Temperature**||MIL-STD-202G Method 108A – 2000 hrs @ 70°C to 100°C|
|Low Temperature*||MIL-STD-810 Method 502.4 – 72 hrs @ 40°C|
|H2S Sour Gas||Exposure (2% H2S)|
|Salt Mist Spray||EC60068-2-52 Test kb Salt Mist (Cyclic)|
|Resistance to Solvents||MIL-STD-202-215 w/change 1|
* Followed by a manipulation test. Manipulation of the labels were performed at -40°C at completion of the low temperature test
**Samples were subjected to 500 hours @ 70°C followed by 500 hours @ 85°C followed by 1000 hours @100°C
LSH Premium Ladder Heatshrink Cable Labels
Silver Fox Legend
|Printing Method:||DTP-1 Printer|
|Material:||Flame retardant single wall matt polyolefin|
|Min. Shrink Temp:||90°C|
|Operating Temp:||-55°C up to 135°|
|Dielectric Strength:||≥ 37 kV/mm|
|Printing:||Print with the Silver Fox DTP-1 300 dpi thermal printer|
|Standards:||UL 224 125°C (257°F) 600V VW-1 (File No. E48762)
CSA C 22.2 No. 198.1: 125°C (257°F) 600V VW-1
Use with Silver Fox Labacus ®Innovator Basic, Advanced or Professional software. Print in conjunction with the Silver Fox Fox-in-a-Box® Plug’N’Play thermal printer using the same ribbon as all the Silver Fox other thermal labels.
Heat Shrink Product Offering
|Product Code||Cable ID Ø Exp. (mm)||Cable ID Ø Rec. (mm)||Labels per Roll||Pack Qty||Colour|
*Specify colour when ordering
STORAGE INSTRUCTIONS for Cable Labels
- Store between 50º F (10º C) and 77º F (25º C)
- Keep In Dark Conditions
- 35% to 65% RH (Resistance Humidity)
Silver Fox Thermal Cable Labels
This video highlights the range of thermal labels that can be printed by the Silver Fox DTP-1 thermal printer.
How To Print 25,000 Cable Labels In 4 Hours
Arabian Falcon Sales Manager, Nirmal Rajesh, describing how the Silver Fox Thermal printer was able to print out 25,000 non-shrink labels in just 4 hours.
Thorne & Derrick are Main Distributors for Silver Fox and can provide expert technical recommendations, installer training and competitive product supply from stock for cable labels to suit LV MV HV power, telecom, data, signal, network and fibre optic cables.
Labelling Features & Benefits
High specification and rigorously tested labels for cables with high resistances to salt mist spray, heat, flame, chemicals, gases (H2S) and UV for onshore and offshore environments are available from stock on short delivery times – zero halogen LSZH cable labels are available with fire safety testing and certification to BS 6853 for Toxic Fume and Smoke Density Emission.