Data Sheets
Band-It Electrical Fastening & ID Solutions GuideDownloadBAND-IT
BAND-IT Cable Ties, Band & Buckle Clamping Systems – Manufactured from Stainless Steel
Cable Ties
BAND-IT stainless steel cable ties, strapping, clamps, banding and buckle systems offer excellent corrosion, strength and temperature performance – also cable tags, marking and identification, cable banding and support clamps and strapping for LV MV HV electricity cables onto cable containment located in substations and buildings.
Stainless steel cable markers are specified for long-term identification of onshore and offshore cables in harsh and hazardous area locations where standard cable labels are not suitable.
Stainless Steel Cable Ties
Band & Buckle Clamps & Strapping
Cable Strapping & Banding
BAND-IT cables ties, strapping and banding manufactured from type 316 stainless steel – an austenitic chromium-nickel stainless and heat resisting steel with superior corrosion resistance.
316 stainless steel cable ties are specified for cable strapping and banding in offshore, marine atmospheres and hazardous area locations where cables are exposed to chemicals, hydrocarbons, salts, acids, and high temperatures. Type 316 has superior creep strengths at elevated temperatures and can be used to strap and bundle 11kV-33kV substation cables.
BAND-IT products are extensively specified for cable strapping and banding in the oil, gas, petrochemical and rail industry – typical applications include IEC 60092, BS6883, BFOU, RFOU, NEK606 and IEC60331 for fire resistance cable straps and support. Cable ties are used to provide intermediate support and restraint to LV HV cables installed to cable containment using cable cleats to ensure compliance with IEC61914 and 18th Edition Regulations.
➡ This table shows the general specification and construction data for the BAND-IT range of cable ties manufactured from stainless steel:
| BAND-IT Stainless Steel Cable Ties Selection Guide | ||||||||
| Material | Tie-Lok 201SS 304SS 316SS |
Ultra-Lok 201SS |
Ball-Lok 304SS 316SS |
Multi-Lok 304SS 316SS |
BAND-IT Ties 316SS |
Self-Lok 304SS 316SS |
Band-Lok 201SS |
Tie-Dex 304SS |
| Coating | No | No | Nylon 11 | Nylon 11 | Nylon 11 PAA | No | No | No |
| Releasable | No | No | No | No | Yes | No | No | No |
| Tool Required | Yes | Yes | No | No | No | No | Yes | Yes |
| Hand Tool | A910/A920 | A940 | K502 | M503 | AE201 | K502 | A950 | A401/A301 |
| Self-Locking | No | No | Yes | Yes | No | Yes | No | No |
33kV/132kV Offshore Substations – LV, MV & HV power cables are located using stainless steel banding and strapping. Image: Siemens.
Stainless Steel Cable Ties – clamping, strapping and banding cables in harsh, hazardous area and high voltage (HV) applications
Band-it – DISTRIBUTORS, STOCKISTS & SUPPLIERS
Thorne & Derrick provide competitive prices and fast delivery from stock for the complete range of Band-It stainless steel cable ties.
View the complete range of BAND-IT cable tie, clamping and identification products ➡
T&D - CABLE ♦ CLAMP ♦ STRAP ♦ JOINT ♦ TERMINATE ♦ CONNECT ♦ GLAND ♦ CLEAT ♦ CRIMP ♦ DUCT ♦ SEAL ♦ REPAIR ♦ LV MV HV 11KV 33KV
