3M 95-EB62-2 | QTII Termination | Cold Shrink | PADS Network Rail Approved

52kV Cable Termination Cold Shrink - 3M 95-EB62-2

52kV Cable Termination Cold Shrink – 3M 95-EB62-2

3M 95-EB62-2

Cold Shrink Single Core Indoor / Outdoor Terminations

PADS Network Rail Approved for Medium Voltage Power Systems

3M 95-EB62-2 uses innovative Cold Shrink Technology combined with Network Rail (NR) and PADS Approval to meet the requirements for the installation on medium voltage electrical infrastructure – forming part of rail cable joints & terminations range by 3M Electrical.

QTII type cable terminations are suitable for terminating and connecting MV HV cables. 3M 95-EB62-2 is a MV cold shrink termination suitable for connecting single core polymeric (XLPE EPR) insulated cables up to 52kV with a copper wire screen in accordance to IEC60840.

95-EB62-2 kit includes the cold shrink QTII Silicone Termination Body with integrated stress control device and silicone elastomeric insulation. Skirts are integrated for easier and faster installation. Silicone tape is included for moisture sealing.

3M 95-EB62-2 QTII Cold shrink Termination

Product Features

  • The versatile design of the prefabricated one-piece cold shrink termination body allows installation on a wide range of cable sizes and types and a fast and easy installation at temperatures ranging from – 20°C to + 50°C
  • No heat or flame is needed during installation – terminations are cold-applied without resort to heat shrink gas torch working
  • Solderless earth connection using Constant Force springs
  • No special jointing tools needed during installation

3M 95-EB62-2

Installation of Medium Voltage Termination 

3M Cold Shrink technology ensures quick, easy and safe installation of the QTII Termination Body by pulling and unwinding the plastic support core in counter clockwise direction. Specialist tools are not required. Included with each kit are installation instructions for the 3M QTII Series Terminations.

3M Electrical Product Identification

3M QTII Series Termination kits are marked with supplier name, cable cross section ranges, voltage class and cable type, storage conditions and manufacturing codes for product traceability.

Performance Tests

3M QTII 95-EB Series Terminations meet and exceed the requirements of the European standard IEC 60840. See Test Report No. TR003376-1

Cable Termination Storage

The shelf life of 3MTM QTII Series Terminations is specified as 3 years. Temperature: – 40°C to +50°C.


3M QTII 95-EB Series Cable Termination Selection

➡ Should you require any assistance with the selection or specification of 3M Electrical Cold Shrink cable joints and terminations for medium or high voltage power cables please do not hesitate to contact us.

3M Electrical Code MV Cable Type Application Range Guide (sqmm) Application Range Guide (sqmm) Max. Lug diameter accepted (mm)
95-EB62-2 Copper Wire Screen 70-400 33.0-53.0 53
95-EB63-2 Copper Wire Screen 400-1000 46.0-66.0 66
95-EB622-2 Copper Tape Screen 70-40 33.0-53.0 53
95-EB632-2 Copper Tape Screen 400-1000 46.0-66.0 66
95-EB631-2 Copper Wire Screen, JCN Cable 400-1000 46.0-66.0 66

Joints & Terminations

Thorne & Derrick provide competitive prices and delivery from stock for a complete range of Joints & Terminations to suit NR/PS/ELP/00008 25/44kV cable.

3m cold shrink selection table 
3M Electrical  Cable Accessory  PADS Conductor Cross Section Dia Over Insulation
95-AC645-1-400/C Joint 054/064139 120-400sqmm 31.5-53.8mm
95-EB62-2 Termination QTII 054/064142 70-400sqmm 33.0 – 53.0mm
95-EP631-2 Termination QTIII 054/063136 240-500sqmm 38.6 – 51.0mm

QT11 QT111 Cold Shrink Terminations

QTII v QTIII Cable Terminations | Materials & Specification Comparison


RAIL CABLE ACCESSORIES, ELECTRIFICATION

& INSTALLATION EQUIPMENT

Thorne & Derrick stock and distribute an extensive range of 400V-33kV Rail Cable Accessories & Power Distribution Systems including feeder pillars to contractors undertaking Low Voltage Power Distribution, HV Electrification & Substations, DC Traction & Networks, OLE and Track Feeder Cable Renewals – complete range of Network Rail PADS approved track terminations, cable joints, cable repair and connection products up to 25kV, including 3M Cold Shrink, Pfisterer CONNEX and Nexans Euromold products.

3M Nexans Pfisterer

Cable Joints, Terminations & Connections | Distributors & Stockists for 3M Cold Shrink | Nexans Euromold | Pfisterer CONNEX

Data Sheets