4 Core 2.5sqmm XLPE SWA Armoured BS6724 Cables LV
Prysmian Afumex armoured power cables manufactured to British Standard Approval BS6724 with LSZH Low Smoke Zero Halogen bedding compound and cable sheath – BS6724 4 core cable is constructed using plain annealed copper stranded (Class 4) conductors with cross sectional area of 2.5sqmm.
4 Core 2.5sqmm XLPE SWA
- Nominal cross sectional area: 2.5sqmm
- Cable type: BS6724
- Cable Voltage: 600/1000 Volts
- Sheath: Low Smoke & Zero Halogen (LSZH)
- Approx. overall diameter: 13.7mm
- Approx. Dia. Under Armour mm: 9.6mm
- Nominal diameter of armour wires mm: 0.9mm
- Approx. cable weight: 400kg
- Maximum conductor resistance at 20°C: 7.41ohms/km
- Conductor short circuit rating (1 sec) kA: 0.35
- Three phase AC clipped direct Amps: 31
- Three phase AC trefoil touching free air Amps: 33
- Volt drop three phase AC mV/A/m: 16
- Low Smoke Zero Halogen Cables
Cable Accessories
The following table enables the correct selection of Cable Accessories to suit 4 core 2.5sqmm, XLPE with steel wire armour (SWA) and low smoke zero halogen (LSZH) outer cable sheath manufactured in accordance with BS6724.
Cable Termination | Cable Glands CW | Cable Glands A2 | Cable Joint | Cable Repair |
Cembre A06 1.5sqmm Cable Lugs | Prysmian BICON CW20S KA419-52 | Prysmian BICON A225 KM409-55 | 3M Scotchcast LVI-1/2-C Resin Joint | 4 Core x 2.5sqmm Cable Sheath Repair |

Cable Cleats | Cable Lugs | Cable Joints | Cable Glands | LV MV HV Cables
➡ See Prysmian for a complete range of LSZH Low Smoke Zero Halogen cable accessories including joints, glands, cleats and cable terminations for use with Afumex cables.