Alroc CWB/12-44

Ex Stock Alroc Tools | Alroc CWB/12-44

The Alroc CWB/12-44 enables the Jointer to remove the bonded semicon with a chamfer on the semiconductor cutback.

Tool Order Code | Alroc CWB/12-44
Tool Function | Remove the outer semi-conductor
Tool Diameter | ø12 – 44 mm | ø0.472 – 1.732 in
Availability | Contact Thorne & Derrick for Stocks
Thickness Capacity | 1,8 mm / 0,071 in
Angle of Chamfer on the Semiconductor | 13°
Remaining Length of the Semiconductor | 25mm / 0,984 in

Alroc CWB/12-44 Benefits

No silicon needed
Fine tuning of the blade with a ‘click’ for each 1/10 mm
Low roughness over insulation
No Clamp stopper needed
For further information, technical support or to check stock for Alroc CWB/12-44 please contact Thorne & Derrick

Spare blades for use with tool reference Alroc CWB/12-44:

MTC3/25 – Spare blade for circular cutting 2,5 mm / 0,098 in (x4)
MTL3/30 – Spare blade for longitudinal cutting 3,0 mm / 0,118 in

Tools for Jointing, Termination & Preparation of LV MV HV Cables manufactured by Alroc, from 660V to 66kV. Precision-engineered, highest-quality tools for all stages of the Cable Preparation procedure including Cable Sheath/Jacket Stripping, Insulation Removal (XLPE EPR) and Semicon Stripping Stripping (Bonded & Peelable). Thorne & Derrick stock and supply Jointing & Termination Tools and extensive range of Cutting & Crimping Tools from Cembre and Klauke.

Complementary Tools to Alroc CWB/12-44 | Alroc BRMRD1E | Alroc PG3HTA/2530 | Alroc PRG4/C25-L252830

Thorne & Derrick distribute the most extensive range of MV HV Medium & High Voltage Cable Joints, Terminations & Connectors from manufacturers including 3M, Prysmian, Nexans Euromold, Elastimold, Pfisterer CONNEX & SEANEX and Shrink Polymer Systems.

Heat shrink, cold shrink, push-on and slip-over cable accessories enable the jointing, terminating and connection of 11kV-33kV and 66kV-132kV cables to oil, air or gas insulated switchgear, transformers, motors and overhead lines distributing electricity at medium/high voltages.

Thorne & Derrick hold large stocks of 11kV 33kV 66kV Joints & Terminations suitable for XLPE, PILC and EPR cables, in both heat shrink and Cold Shrink technologies, to service the medium/high voltage power cable accessory requirements of UK and international customers.