Barrier Cable Glands Ex e, Ex d, Ex nR, Ex ta Armoured Cables – CMP PX2K

Barrier Cable Glands Ex e, Ex d, Ex nR, Ex ta Armoured Cables - CMP PX2K

CMP PX2K Barrier Cable Gland

CMP PX2K barrier cable gland for terminating all types of wire braid, tape, strip and single wire armoured type cables located in Zone 2 hazardous areas.

CMP PX2K Cable Glands

  • Metal-to-metal armour clamping
  • Direct & remote installation cable gland
  • Compound barrier type flameproof seal
  • Controlled outer ‘load retention’ seal
  • Unique OSTG prevents overtightening cable gland
  • Integral protected deluge seal
  • -60˚C to +85˚C
  • Class I Zone 1, 21 and Zone 2, 22 Class I Division 1 & 2 ABCD
  • Globally marked – hazardous area certified to IECEx, ATEX, UL & cCSAus
  • EMC tested
  • Order Code: CMP PX2K** (Brass) Cable Gland 

Hazardous Area Cable Glands

CMP PX2K barrier cable glands are certified by ATEX for safe glanding of cables in Zone 2 potentially explosive atmospheres according to the following hazardous area classification:

  • II 2G, II 1D, Ex d IIC Gb, Ex e IIC Gb, Ex ta IIIC Da
  • II 3G Ex nR IIC Gc, IM2 Ex d I Mb, Ex e I Mb

➡ See full range of CMP ATEX Barrier Cable Glands for armoured, braided and unarmoured cables – to view the complete range of CMP glands for Zone 1 & Zone 2 cable termination please visit Hazardous Area Cable Glands Zone 1 & Zone 2 locations.

cmp PX2K Barrier Cable Glands specification

CMP PX2K Barrier Cable Gland Material: Brass, Electroless Nickel Plated Brass, Aluminium, Stainless Steel

Cable Gland Design Specification: BS6121: Part 1: 1989, IEC 62444, EN 62444

The following table enables the selection of CMP PX2K barrier cable glands – should you need to discuss a specific application for hazardous area or high voltage cable applications please call T&D.

CMP Cable Gland SizeAvailable Entry Threads “C” (Alternative Metric Thread Lengths AvailableNumber of CoresDiameter Over Conductors “A”Cable Bedding Diameter “G”Overall Cable Diameter “B”Armour RangeAcross Flats “D”Across Corners “D”Protrusion Length “F”Combined Ordering Reference (Brass Metric)Cable Gland ShroudCable Gland Weight (kgs)
StandardOptionGrooved Cone (X)Stepped Cone (W)
MetricThread Length (Metric) “E”NPTThread Length (NPT) “E”NPTMaxMaxMaxMinMaxMinMaxMinMaxMaxMaxMaxSizeTypeOrdering Suffix
PX2K20s16M2015.01/2″19.93/4″1111.711.76.113.10.31.00.81.2530.533.662.020S16PX2K1RAPVC060.24
PX2K20SM2015.01/2″19.93/4″1111.711.79.515.90.31.00.81.2530.533.662.020SPX2K1RAPVC060.23
PX2K20M2015.01/2″19.93/4″1112.612.912.520.90.41.00.81.2530.533.663.020PX2K1RAPVC060.24
PX2K25SM2515.03/4″20.21″2117.517.914.022.00.41.21.251.637.541.369.525SPX2K1RAPVC090.37
PX2K25M2515.03/4″20.21″2117.517.918.226.20.41.21.251.637.541.369.525PX2K1RAPVC090.37
PX2K32M3215.01″25.01 1/4″3823.623.923.733.90.41.21.62.046.050.575.032PX2K1RAPVC110.57
PX2K40M4015.01 1/4″25.61 1/2″5930.030.327.340.40.41.61.62.055.060.575.040PX2K1RAPVC150.80
PX2K50SM5015.01 1/2″26.12″8936.636.935.246.70.41.62.02.560.066.077.050SPX2K1RAPVC180.90
PX2K50M5015.02″26.92 1/2″8941.041.340.453.00.61.62.02.570.177.177.050PX2K1RAPVC211.19
PX2K63SM6315.02″26.92 1/2″11547.948.445.659.40.61.62.02.575.082.579.763SPX2K1RAPVC231.39
PX2K63M6315.02 1/2″39.93″11553.754.054.665.80.61.62.02.580.088.080.363PX2K1RAPVC251.41
PX2K75SM7515.02 1/2″39.93″14059.960.259.072.00.61.62.02.590.099.086.875SPX2K1RAPVC282.09
PX2K75M7515.03″41.53 1/2″14064.264.266.778.40.61.62.53.0100.0110.088.375PX2K1RAPVC302.54
PX2K90M9024.03 1/2″42.84″20075.375.676.290.30.81.63.154.0115.0126.5102.190PX2K1RAPVC323.71
PX2K100M10024.03 1/2″42.84″20085.685.986.1101.40.81.63.154.0127.0139.7114.0100PX2K1RALSF334.31

CMP PX2K Barrier Cable Gland

Barrier Cable Glands Ex e, Ex d, Ex nR, Ex ta Armoured Cables - CMP PX2K

PX2K Cable Glands CMP

CMP Cable Glands

CMP Cable Glands – cable terminations for Industrial, High Voltage, Hazardous Area Explosive Atmospheres (ATEX & IECEx) & Group 1 Mining Cables  – including CIEL High Fault Current, SOLO Low Smoke Zero Halogen, ZEN Insulated & RapidEx Barrier Cable glands

➡ For connecting, repairing or splicing cables see Hazardous Area Cable Joints.

Data Sheets