Klauke EKM60ID | Battery Powered Cable Crimping Tool 10-240sqmm

Klauke EKM60ID

Crimping Tools

The Klauke EKM60ID is a battery powered cable crimping tool that has a crimping range for cable lugs and connectors up to 240qmm – suitable for extra large crimping thanks to innovative 2-stage telescopic cylinders.

The EKM60ID crimping tool from Klauke uses iPress App which allows all tool data to be viewed at a glance and indent crimping removing the need to change the die.

Klauke crimping tools are available with Bosch or Makita battery system.

Battery powered hydraulic crimping tool with a crimping range between 10-240sqmm.

EKM60ID manufactured by Klauke

Klauke EKM60ID

Cable Crimping Tool

Option for battery system: Bosch or Makita
Easy readout of all data via Bluetooth
With innovative 2-stage telescopic cylinder
Closed head flip top style, rotatable battery powered cable crimping tool
Klauke EKM60ID is simple and safe: one-button operating concept for controlling all tooling functions
Effortless operations because of balanced centre of gravity
Crimping tool features a LED for workplace illumination
Tool always ready for use thanks to the battery charge status and service display
See Also | Ratchet Cable Cutters | Cable Crimping Tools

Battery Powered Cable Crimping Tool 10-240sqmm – Klauke EKM60ID

Technical Specification for Klauke EKM60ID

The following table outlines the performance specification of the Klauke EKM60ID crimping tool:

Cable crimping force	30 – 60 kN
Stroke	35.5 mm
Crimping tool range	Cu: 10 – 240 sqmm, Al: 50 – 240 sqmm
Crimping tool cycle	2 s (for ARS) to 7 s (depending on cross-section)
Battery voltage	18 V
Battery capacity	2.0 Ah, Li-Ion
Charging time	15 min
Weight incl. battery	2.5 kg
Ambient temperature	-10°C to +40°C

Battery Powered Cable Crimping Tool – Dies

The following tables show the correct die sets to use for installing cable lugs, connectors, joints and end sleeves using Klauke EKM60ID crimping tool:

Tool Suitable for	Cable Crimping range sqmm	Crimp Profile
Copper tubular cable lugs and connectors
Tubular cable lugs and connectors, standard type, Tubular cable lugs for switch gear connections	10 – 240	Standard tubular cable lugs, tubular cable lugs for switchgear connections
Tubular cable lugs and connectors for fine stranded conductors	10 – 240	Tubular cable lugs and connectors for fine wire conductors

Tool Suitable for	Cable Crimping range sqmm	Crimp Profile
Terminals, connectors and pin terminals acc. to DIN
Solderless terminals (DIN 46234) connectors and pin terminals (DIN 46230, DIN 46341)	10 – 240	Crimp terminals, connectors and pin terminals

Tool Suitable for	Cable Crimping range sqmm	Crimp Profile
Aluminum compression cable lugs and connectors
Aluminum compression cable lugs and connectors acc. to DIN	50 – 240	Pressed cable lugs and connectors according to DIN – Al
Compression joints for full tension connections of Aldrey conductors acc. to DIN EN 50182, Al-conductor acc. to DIN EN 50182, 120 – 185 mm2	50 – 185	Press connector for tension-resistant connections of Aldrey ropes
Compression joints acc. to DIN 48085, part 3 for Al/St-cable acc. to DIN EN 50182	50 – 240	Press connector after DIN 48085, Teil 2

Tool Suitable for	Cable Crimping range sqmm	Crimp Profile
Aluminum/copper compression cable lugs and connectors
Aluminum/copper compression cable lugs and connectors	50 – 240	Pressed cable lugs and connectors according to DIN – Al / Cu

Cable Tools

Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.

Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.