Battery Powered Cable Crimping Tool 16-400sqmm – Klauke EK120/42
The Klauke EK120/42 is a battery powered cable crimping tool that has a very wide crimping range for cable lugs and connectors up to 400sqmm thanks to its C-head – suitable for up to 60% less crimping operations due to wide crimping compared with 6 t tools
The Klauke EK120/42 crimping tool uses iPress App which allows all tool data to be viewed at a glance and is easy to handle thanks to optimum weight distribution.
Klauke crimping tools are available with Bosch or Makita battery system.
Battery powered hydraulic crimping tool with a crimping range between 16-400sqmm.
See also: Battery Operated Cable Cutting Tools
Battery Powered Cable Crimping Tool 16-400sqmm – Features
- Option for battery system: Bosch or Makita
- Easy readout of all data via Bluetooth
- Open head, rotatabl battery powered cable crimping tool
- Quality assurance by visual and audible signals in case of failure
- Klauke EK120/42 is simple and safe: one-button operating concept for controlling all tooling functions
- Effortless operations because of balanced centre of gravity
- Crimping tool features a LED for workplace illumination
- 2-stage hydraulic system with fast feed and power stroke
- Simple and safe: Automatic retraction of crimping tool when operation is complete
- Automatic retraction stop (ARS) for positioning control in case of multiple crimping of cables
- Tool always ready for use thanks to the battery charge status and service display
Technical Specification
The following table outlines the performance specification of the Klauke EKM120/42 crimping tool:
Cable crimping force | 120 kN |
Stroke/opening width | 42 mm |
Crimping tool range | 16-400sqmm |
Crimping tool cycle | 8 s to 9 s (depending on cross-section) |
Battery voltage | 18 V |
Battery capacity | 5.0 Ah, Li-Ion |
Charging time | 45 min |
Weight incl. battery | 7.1 kg |
Ambient temperature | -10°C to +40°C |
BATTERY POWERED CABLE CRIMPING TOOL – DIES
The following tables show the correct die sets to use for installing cable lugs, connectors, joints and end sleeves using Klauke EKM120/42 crimping tool:
Suitable for | Crimping range sqmm | Type of die | ||
---|---|---|---|---|
Tubular cable lugs and connectors, Cu | ||||
Tubular cable lugs and connectors, Cu, standard type, tubular cable lugs for switchgear connections | 16 – 400 | Crimping dies HR 13 | ||
Insulated tubular cable lugs and connectors, insulated pin terminals | 10 – 150 | Crimping dies HIS 13 | ||
Tubular cable lugs and connectors for fine stranded conductors | 16 – 150 | Crimping dies HF 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Compression cable lugs and connectors acc. to DIN – Cu | ||
Compression cable lugs (DIN 46235) and connectors (DIN 46267, part 1) Cu | 16 – 300 | Crimping dies HD 13 |
Double compression cable lugs | 2 x 50 – 2 x 120 | Crimping dies HDP 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Terminals, connectors and pin terminals acc. to DIN – Cu | ||
Terminals (DIN 46234) and pin terminals (DIN 46230) Cu, solderless connectors (DIN 46341) Cu | 16 – 150 | Crimping dies HQ 13 |
Insulated terminals and pin terminals | 10 – 95 | Crimping dies HISQ 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Sleeves for compacted conductors and sector shaped conductors, Cu | ||
Pre-rounding crimping dies for Al and Cu sector shaped conductors | 10 sm – 300 se / 300 sm | Crimping dies HRU 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Aluminum compression cable lugs and connectors acc. to DIN | 10 – 240 | Crimping dies HA 13 |
Compression points for full tension connections of Aldrey cables acc. to DIN EN 50182, Al conductors DIN EN 50182, 120 – 185 mm² | 25 – 185 | Crimping dies HAD 13 |
Compression joints acc. to DIN 48085, part 3 for Al-steel cables acc. to DIN EN 50182, aluminum crimping | 25/4 – 120/20 | Crimping dies HAST 13 |
Compression joints acc. to DIN 45085, part 3 for Al-steel cables acc. to DIN EN 50182, steel crimping | 25/4 – 120/20 | Crimping dies HST 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Aluminum/copper compression cable lugs and connectors | ||
Aluminum/copper compression cable lugs and connectors | 10 – 240 | Crimping dies HA13 and crimping dies HD13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Clamps | ||
Clamps, C-type | 10 – 70 | Crimping dies HC 13 / HMC 13 |
Clamps, H-type | 70 – 120 | Crimping dies HAH 13 |
Suitable for | Crimping range sqmm | Type of die |
---|---|---|
Cable end-sleeves | ||
Cable end-sleeves | 25 – 240 | Crimping dies HAE 13 |
Cable end-sleeves, trapezoidal, for fine stranded conductors | 25 – 240 | Crimping dies HAES 13 |
CABLE TOOLS
Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.
Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.