Associated Manufacturers

Contact us

Get quote

Battery Powered Cable Crimping Tool 16-400sqmm – Klauke EK120U

Battery Powered Cable Crimping Tool 16-400sqmm – Klauke EK120U

Battery Powered Cable Crimping Tool 16-400sqmm – Klauke EK120U

Crimping Tools

The Klauke EK120U is a battery powered cable crimping tool that has a large crimping range for cable lugs and connectors up to 400sqmm – suitable for up to 60% less crimping operations due to wide crimping compared with 6 t tools.

The Klauke EK120U crimping tool uses iPress App which allows all tool data to be viewed at a glance and has a H-head for deep groove crimping.

Klauke crimping tools are available with Bosch or Makita battery system.

Battery powered hydraulic crimping tool with a crimping range between 16-400sqmm.

➡ See also: Battery Operated Cable Cutting Tools

Klauke EK120U Cable Crimping Tool – Features

  • Option for battery system: Bosch or Makita
  • Easy readout of all data via Bluetooth
  • Closed head, rotatable battery powered cable crimping tool
  • Quality assurance by visual and audible signals in case of failure
  • Klauke EK120U is simple and safe: one-button operating concept for controlling all tooling functions
  • Effortless operations because of balanced centre of gravity
  • Crimping tool features a LED for workplace illumination
  • 2-stage hydraulic system with fast feed and power stroke
  • Simple and safe: Automatic retraction when operation is complete
  • Automatic retraction stop (ARS) for positioning control in case of multiple crimping of cables
  • Tool aways ready for use thanks to the battery charge status and service display
Battery Powered Cable Crimping Tool 16-400sqmm - Klauke EK120U

Battery Powered Cable Crimping Tool 16-400sqmm – Klauke EK120U

Technical Specification

The following table outlines the performance specification of the Klauke EK120U crimping tool:

Cable Crimping force 120 kN
Stroke 20 mm
Crimping tool range 16-400sqmm
Crimping tool cycle 7 s to 8 s (depending on cross-section)
Battery voltage 18 V
Battery capacity 5.0 Ah, Li-Ion
Charging time 45 min
Weight incl. battery 6.2 kg
Ambient temperature -10°C to +40°C

Battery Powered Cable Crimping Tool – Dies

The following tables show the correct die sets to use for installing cable lugs, connectors, joints and end sleeves using Klauke EK120U crimping tool:

Suitable for Crimping range sqmm Dies
Tubular cable lugs and connectors, Cu
Tubular cable lugs and connectors, Cu, standard type, tubular cable lugs for switchgear connectors 16 – 400 Crimping dies HR 13
Insulated tubular cable lug and compression joints 10 – 150 Crimping dies HIS 13
Tubular cable lugs and connection for fine stranded conductors 16 – 150 Crimping dies HF 13

 

Suitable for Crimping range sqmm Dies
Compression cable lugs and connectors acc. to DIN – Cu
Copper compression cable lugs (DIN 46235) and connectors (DIN 46267, part 1) Cu 16 – 300 Crimping dies HD 13
Double compression cable lugs 2 x 50 – 2 x 120 Crimping dies HDP 13

 

Suitable for Crimping range sqmm Dies
Terminals, connectors and pin terminals acc. to DIN – Cu
Terminals (DIN 46234) and pin terminals (DIN 46230) Cu, solderless connectors (DIN 46341) Cu 16 – 150 Crimping dies HQ 13
Insulated terminals and pin terminals 10 – 95 Crimping dies HISQ 13

 

Suitable for Crimping range sqmm Dies
Sleeves for compacted conductors and sector shaped conductors, Cu
Pre-rounding crimping dies for Al and Cu sector shaped conductors, 3 and 4 core sector shaped conductors 10 sm – 300 se / 300 sm Crimping dies HRU 13

 

Suitable for Crimping range sqmm Dies
Compression cable lugs and connectors acc. To DIN-Al
Compression cable lugs and connectors acc. To DIN-Al 10 – 240 Crimping dies HA 13
Compression joints for full tension connections of Aldrey cables acc. to DIN EN 50182, Al conductors DIN EN 50182, 120 – 185 mm² 25 – 185 Crimping dies HAD 13
Compression joints acc. to DIN 48085, part 3 for Al-steel cables acc. to DIN EN 50182, aluminum crimping 25/4 – 120/20 Crimping dies HAST 13
Compression joints acc. to DIN 48085, part 3 for Al-Steel cables acc. to DIN EN 50182, steel crimping 25/4 – 120/20 Crimping dies HST 13

 

Suitable for Crimping range sqmm Dies
Aluminum/copper compression cable lugs and connectors
Aluminum/copper compression cable lugs and connectors 10 – 240 Crimping dies HA13 and crimping dies HD13

 

Suitable for Crimping range sqmm Dies
Clamps and screw connectors
C-clamps 10 – 70 Crimping dies HC 13 / HMC 13
H-clamps 70 – 120 Crimping dies HAH 13

 

Suitable for Crimping range sqmm Dies
Cable end-sleeves
Cable end-sleeves 25 – 240 Crimping dies HAE 13
Cable end-sleeves, trapezoidal, for fine stranded conductors 25 – 240 Crimping dies HAES 13

 

Cable Tools

Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.

Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.

Cable Crimping Cable Cutting Tools

View the complete range of Cable Crimping & Cable Cutting Tools

CABLE TOOLS

Should you require technical assistance to select the correct cable crimping or cable cutting tools please contact us.

Thorne & Derrick are Specialist Distributors of cable tools to enable the preparation of all LV MV HV cables prior to the installation of Joints, Terminations & Connectors – this includes Klauke, Cembre, Alroc and Boddingtons cable jointing tools for removal of cable sheath, screen and insulation on 11/33kV (MV) and 66kV/132kV (HV) power cables.

Cable Crimping Cable Cutting Tools

View the complete range of Cable Crimping & Cable Cutting Tools