Green & Yellow PVC Copper Earthing Tapes

Green & Yellow PVC Copper Earthing Tapes

Thorne & Derrick distribute the complete range of PVC Earth Tapes manufactured from high conductivity copper by AN Wallis and have a width and thickness of 25 x 3mm (75sqmm C.S.A. Cross Section Area) – green & yellow PVC copper earthing tapes are available in coil size of 25m and 50m.

Green & Yellow PVC copper tape earth conductors with fault current ratings according to BS7430 with an initial copper conductor temperature of 30°C and a maximum temperature of 250°C.

➡ Earth Rods | Copper Earth Plates | Copper Earth Mats | Copper Conductors

Green & Yellow PVC

Copper Earthing Tapes

Selection Table

The table enables the selection of green/yellow PVC covered earth tapes when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number	Earth Tape W x H	Copper Cross Sectional Area (CSA) / Thickness	Weight Per Metre	Standard Copper Coil Size
TC 253 GY	25mm x 3mm	75sqmm	0.79kg	25m & 50m

Copper Earth Tape

Green & Yellow PVC copper earthing tapes are specified for above ground earthing conductors due to copper theft risk of insecure stranded copper conductors – a complete range of earth bars, connector joints, fixing clips and clamps for connecting conductor tape to copper earth rods.

Copper Earth Tapes

Earth Tapes, Cables & Conductors – bare copper, PVC covered and LSOH (Low Smoke Zero Halogen) tapes, hard drawn copper bar and earth braids. LV-HV-EHV earthing tapes and systems for substations, transformers and generators.

Substations LV MV HV

Thorne & Derrick supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.