Heat Shrink Cable Gland HCS4s | Cable Entry Sealing Glands
Heat Shrink Cable Gland HCS4s
Cable Glands
Heat Shrink Cable Glands | Protect & Seal LV MV HV Power Cables
Heat Shrink Cable Gland HCS4s is suitable for all types of non armoured power and signal cables and cable glanding of MV and HV applications – the cable glands are typically used to support and gland unarmoured power cables including Triplex and 11kV/33kV (BS7870).
For sealing and terminating medium/high voltage steel wire armoured (SWA – multicore) or aluminium wire armoured (AWA – single core) cables please see bolt-on, “top-hat” design 11kV cable glands.
The HCS4s cable entry seal gland provides a watertight, fume-tight seal up to 53mm cable outside diameter where cables enter junction boxes, bulkheads or other electrical enclosures, such as cable boxes.
- Heat Shrink Cable Gland Part Ref:Â HCS 4s
- Cable O/D max: 53mm
- Cable O/D min: 19mm
- Bulkhead Thickness Max: 10mm
- Gland Length Rec: 170mm
- Gland Drill Hole: 60mm
- Heat Shrink Cable Glands MV HV 11kV 33kV
Heat Shrink
Heat Shrink Products Also Available | Cable Caps | Breakouts | Cable Repair | JointsÂ
The cable glands are manufactured in accordance with MIL-1-81765/1 and MIL-1-23053/15 specifications and provide a flame retarded adhesive lined body along with a male threaded part to enable fixture to the gland plate. Heat shrink cable glands are complete with brass threaded adaptors, locknuts and fibre washers to suit all power, signalling and switching equipment and are available for the watertight sealing and mechanical retention of cables up to 70mm outside diameter. Should you require technical support and selection of hazardous area cable glands with ATEX Certification contact us to discuss your requirements or visit the Hawke range of 501/453 Glands.
Heat Shrink Cable Glands MV HVDownload
