E1XF75S Hazardous Area Cable Glands – Prysmian KA473-62

E1XF16 Cable Glands - Hazardous Area Exd IIC / Ex e II (Prysmian KCA473)

E1XF75S Cable Glands – Hazardous Area Exd IIC / Ex e II

Prysmian KA473-62 (E1XF75S) E1XF hazardous area cable glands are certified ΙΙ 2GD, Ex e ΙΙ & Ex d ΙΙC under ATEX directive 94/9/EC suitable for circular braid wire armour cables with extruded polymeric bedding and oversheath achieving IP66 seal onto cable and to enclosure with suitable sealing washer or thread sealant.

Prysmian KA473-62 are suitable for most climatic conditions – weatherproof and waterproof with a service temperature range –60°C to +90°C.

Prysmian E1XF75S

Hazardous Area Cable Glands

Technical Specification

ATEX Cable Glands

ATEX Cable Glands

  • Manufacturer: Prysmian
  • Brand: Bicon
  • Order Code: KA473-62 (E1XF75S)
  • Cable Gland Size: E1XF75S
  • Pack Quantity: 1 Cable Gland
  • Cable Dimensions Under Armour Ø (A): Min 56.2mm Max 62.2mm
  • Cable Dimensions Overall Ø (B): Min 62.0mm Max 71.6mm
  • Entry Thread (D) : M75×1.5
  • Thread Length (E) : 15mm
  • Protrusion Length (F): 73mm
  • Hexagon A/F (G): 90.2mm
  • Hexagon A/C (H): 99.1mm
  • Nickel Plated Version: Prysmian KA473-62V (E1XF75S)
  • More: Hazardous Area Cable Glands | Flameproof & Explosion Proof
E1XF (NPT) Cable Glands – Hazardous Area Exd IIC / Ex e II (Prysmian 473NP)

E1XF Cable Glands – Hazardous Area Exd IIC / Ex e II (Prysmian KA473)

Hazardous Area Cable Accessories

3M Cable Joints Terminations Cold Shrink MV HV

To ensure the reliability of uninterrupted LV MV HV power supply in hazardous area locations, T&D distribute the 3M Electrical range of Scotchcast cable joints which utilise chemical and hydrocarbon resistant resin for long-term stability in Zone 1 and Zone 2 areas – hazardous area cable joints are suitable for power, control and instrumentation cables.

The 3M LC range of Cold Shrink joints are specified for both onshore and offshore jointing of cables in hazardous areas and potentially explosives atmospheres as the installation is completed without the requirement for “hot-working” techniques associated with heat shrink joints and terminations.

➡ See Cold Shrink for cable accessories including cable insulation tubes, end caps and abandonment kits.

Hazardous Area Cable Joints

Hazardous Area Cable Connections | Glands | Joints | Terminations