15kV 17.5kV 3 Core PILC Cable Termination Indoor Heat Shrink

3 Core PILC Cable Termination

PILC cable termination kits using heat shrink technology are suitable for indoor terminating of medium/high voltage (MV-HV) 3 core cables up to 17.5kV – outdoor cable termination version available.

3 Core PILC Cable Termination


  • Cable Termination Type – Heat Shrink
  • Termination Location – Indoor
  • Cable Insulation Type – PILC Paper Insulated Lead Covered
  • Number of Cores – 3 Core
  • Conductors – 25sqmm, 35sqmm, 50sqmm, 70sqmm, 95sqmm, 120sqmm, 150sqmm, 185sqmm, 240sqmm, 300sqmm, 400sqmm
  • Heat Shrink Standard Tail Length – 650mm

The following table enables the heat shrink termination kit selection for 3 core indoor PILC cables up to 17.5kV – customised terminations available to suit all types of high voltage paper insulation cables, belted or screened.

Also Terminations : Single Core Indoor 17.5kV PILC | Single Core Outdoor 17.5kV PILC

15kV/17.5kV Cable Termination Indoor  PILC Cable Termination Kit Range 15kV/17.5kV Cable Termination Outdoor 
3TIS-12P-A 3 Core 25-50sqmm 3TES-12P-A
3TIS-12P-B 3 Core 70-95sqmm 3TES-12P-B
3TIS-12P-C 3 Core 120-185sqmm 3TES-12P-C
3TIS-12P-D 3 Core 240-400sqmm 3TES-12P-D

Cable Termination Kit List

Anti Track Heat Shrink Core Tubes (Red) 3
Oil Barrier Resistant Heat Shrink Tubes (Clear) 3
Stress Control Heat Shrink Tubes (Black) 3
Yellow Stress Relief Tape (Screened HV PILC Cable only) 3
Mastic Crutch Wedge 1
3 Core Conductive Breakout Boot 1
Mastic Sealing Tape Roll 1
Red Mastic Sealing Tape 1
PILC Cable Cleaning Degreasing Wipes 3
HV Jointing Instructions 3 Core PILC Outdoor 1


MV HV Cable Terminations | 11kV XLPE 3 Core Termination | 33kV 3 Core Cable Termination

➡ See complete range of Heat Shrink HV Cable Terminations

15kV 17.5kV Cable Termination Kits

17.5kV PILC 3 Core Cable Termination Bushing Boots | Cable Glands | Lead Sheath Earth Kits | Cable Lugs

Heat Shrink Terminations & Joints

T&D can kit and despatch same day MV-HV cable joints and terminations for immediate delivery including 6.6kV, 11kV and 33kV voltages for fault repairs and to restore power to unplanned outages.

Heat Shrink Cable Terminations 6.6kV 11kV 33kV

Cable Terminations – 3 and single core XLPE & PILC high voltage power cables, including cable joints, using heat shrink tubes technology.

Terminating & connecting high voltage cable

T&D stock and distribute the complete range of heat shrink, cold shrink and plug-in style cable terminations and connectors for MV-HV cable connections to air, gas or oil insulated switchgear and transformers, 11kV-33kV.

11kV 33kV Joints Terminations Connectors - 3M Pfisterer Nexans Elastimold

T&D Approved Stockist – 3M, Nexans Euromold & Pfisterer

Data Sheets