Tinned Copper Earthing Tapes

T&D distribute the complete range of Earth Tapes manufactured from high conductivity tinned copper by AN Wallis in an extensive range of widths and thicknesses from 12.5 x 1.5mm (18.75sqmm C.S.A. Cross Section Area) to 50 x 8mm (400sqmm C.S.A.) – tinned copper earthing tapes are available in a selection of coil sizes.

Tinned copper tape earth conductors with fault current ratings according to BS7430 with an initial copper conductor temperature of 30°C and a maximum temperature of 250°C.

➡ Earth Rods | Copper Earth Plates | Copper Earth Mats | Copper Conductors

Tinned Copper Earthing Tapes

Selection Table

The table enables the selection of tinned copper earth tapes when specifying copper conductors for earthing and lightning protection systems.

AN Wallis Part Number	Earth Tape W x H	Copper Cross Sectional Area (CSA) / Thickness	Weight Per Metre	Standard Copper Coil Size
TT 121	12.5mm x 1.5mm	18.75sqmm	0.17kg	100m
TT 123	12.5mm x 3mm	37.50sqmm	0.33kg	100m
TT 201	20mm x 1.5mm	30sqmm	0.27kg	100m
TT 203	20mm x 3mm	60sqmm	0.53kg	100m
TT 251	25mm x 1.5mm	37.5sqmm	0.33kg	100m
TT 253	25mm x 3mm	75sqmm	0.67kg	50m
TT 254	25mm x 4mm	100sqmm	0.89kg	50m
TT 256	25mm x 6mm	150sqmm	1.33kg	40m
TT 302	30mm x 2mm	60sqmm	0.53kg	50m
TT 303	30mm x 3mm	90sqmm	0.80kg	50m
TT 304	30mm x 4mm	120sqmm	1.07kg	40m
TT 305	30mm x 5mm	150sqmm	1.33kg	40m
TT 313	31mm x 3mm	93sqmm	0.83kg	50m
TT 3154	31.5mm x 4mm	126sqmm	1.13kg	40m
TT 316	31mm x 6mm	186sqmm	1.65kg	30m
TT 383	38mm x 3mm	114sqmm	1.01kg	50m
TT 385	38mm x 5mm	190sqmm	1.69kg	30m
TT 386	38mm x 6mm	228sqmm	2.02kg	25m
TT 403	40mm x 3mm	120sqmm	1.06kg	40m
TT 404	40mm x 4mm	160sqmm	1.42kg	30m
TT 405	40mm x 5mm	200sqmm	1.78kg	25m
TT 406	40mm x 6mm	240sqmm	2.16kg	25m
TT 4063	40mm x 6.3mm	252sqmm	2.24kg	25m
TT 503	50mm x 3mm	150sqmm	1.33kg	40m
TT 504	50mm x 4mm	200sqmm	1.78kg	30m
TT 505	50mm x 5mm	250sqmm	2.22kg	20m
TT 506	50mm x 6mm	300sqmm	2.68kg	20m
TT 5063	50mm x 6.3mm	315sqmm	2.80kg	20m
TT 508	50mm x 8mm	400sqmm	3.60kg	15m

Copper Earth Tape

Tinned copper earthing tapes are specified for above ground earthing conductors due to copper theft risk of insecure stranded copper conductors – a complete range of earth bars, connector joints, fixing clips and clamps for connecting conductor tape to copper earth rods.

Earth Tapes

Earth Tapes, Cables & Conductors – bare copper, PVC covered and LSOH (Low Smoke Zero Halogen) tapes, hard drawn copper bar and earth braids. LV-HV-EHV earthing tapes and systems for substations, transformers and generators.

Substations LV MV HV

T&D supply DNO’s, IDNO’s, ICP’s and utility power contractors involved in the construction and maintenance of MV-HV substations – this includes duct seals for underground cable duct, cable cleats to support cables, underground cable protection and a full range of MV-HV cable joints, terminations and connectors in heat shrink, cold shrink and push-on technologies for XLPE, PILC, oil and gas insulated cables.