Driving Heads For Installing Copper Earth Rods
Driving Heads For Installing Earth Rods
T&D distribute the complete range of Driving Heads used when installing earth rods – the steel driving heads protect the internal thread and the top of the solid copper earth rod from damage when being driven into the ground to form an essential component of the overall Earthing & Lightning Protection system.
The driving heads are manufactured from high quality and durable steel – hand installed without requirement for specialist tooling.
➡ Earth Tapes | Earth Rods | Copper Earth Plates | Earth Bars | Copper Conductors
Driving Heads
Selection Table
Depending on the solid copper earth rod diameter the following table enables the correct selection and specification of driving heads to suit the earthing application – full supporting range of driving spikes and coupling dowels are also available to ensure optimum performance and conductivity of the copper earth rod system.
| Head D mm | Head L mm | Earth Rod Thread Size | Used With | L1 mm | Unit Weight kg | Pack Quantity | AN Wallis Part Number |
| 16 | 38 | M10 | Copper Rods 16mm Diameter | 20 | 0.03 | 25 | ERCD 16 |
| 20 | 41 | M10 | Copper Rods 19mm Diameter | 20 | 0.06 | ERCD 20 | |
| 25 | 45 | M12 | Copper Rods 25mm Diameter | 25 | 0.10 | ERCD 25 |
Driving Heads For Installing Earth Rods Dimensions
T&D distribute Substation Electrical Safety Equipment (MV-HV-EHV) – contact us for CATU insulating matting, voltage detectors, insulating gloves, life saving kits and arc flash protection.
Driving Heads For Installing Earth RodsDownload
