Driving Spikes For Installing Copper Earth Rods

View Sub Products

Driving Spikes For Installing Earth Rods

Driving Spikes For Installing Earth Rods

T&D distribute a complete range of Driving Spikes that enable solid copper earth rods to be driven easily into the ground as part of an Earthing & Lightning Protection system.

The driving spikes also protect the copper earth rod threads during installation with the driving head – these driving spikes are internally threaded so that they can be screwed directly onto the earth rod with M10 or M12 thread options to suit 16mm, 20mm or 25mm diameter rods.

Steel driving spikes are easily hand installed without requirement for specialist tooling.

➡ Earth Tapes | Earth Rods | Copper Earth PlatesEarth Bars | Copper Conductors

Driving Spikes

Selection Table

Depending on the solid copper earth rod diameter the following table enables the correct selection and specification of driving spikes to suit the earthing application – full supporting range of driving heads and coupling dowels are also available to ensure optimum performance and conductivity of the copper earth rod system.

Spike D mm Spike L mm Earth Rod Thread Size Used With  L1 mm Unit Weight kg Pack Quantity AN Wallis Part Number
16 42 M10 Copper Rods 16mm Diameter 20 0.03 25 ERCS 16
20 51 M10 Copper Rods 19mm Diameter 20 0.06 ERCS 20
25 60 M12 Copper Rods 25mm Diameter 25 0.10 ERCS 25

 

Driving Spikes For Installing Earth Rods Dimensions

Driving Spikes For Installing Copper Earth Rods Dimensions

SUBSTATION EARTHING & MV HV CABLE JOINTING

To complement Earthing & Lightning Protection products, T&D distribute the broadest range of MV HV Joints, Terminations & Connectors.

MV HV Joints Terminations Connectors

Nexans Euromold Connectors – cable connectors for terminating 11kV 33kV cables onto all type of switchgear and transformer bushings.