LV MV HV Medium & High Voltage Cables
Alroc DPC10-45 provides a neat and straight cut at the edge of the cable insulation in a midspan location on the cable by the cable jointer ro splicer.
Cable preparation is essential to the performance and stability of MV-HV cable joints and terminations – if cables are prepared incorrectly using sub-standard tools or basic hand tools then the risk incidence of cable failure is increased.
The following instructions detail how to use the Alroc DPC10-45 insulation removal and stripping tool safely and effectively.
Alroc Cable Tools 11kV 33kV MV HV
For more than 30 years, ALROC has been engineering, designing and manufacturing cable jointing tools, cable preparation tools and cable fixing solutions to establish the most complete product range in the following areas:
Jointing & Preparation Tools For Cable Jointers & Linesmen Working On MV-HV-EHV Cables
Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage power systems:
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MVÂ
Alroc CWF3/60 MV HV Cable Jointing Tool
MV HV Medium & High Voltage Cables
The below video shows the Alroc CWF3/60 cable jointing tool used by MV-HV jointers to remove the outer sheath and insulation to prepare the cable for the installation of joints, terminations or connectors.
The Alroc CWF3/60 allows the jointer to remove the outer sheath (PE-PVC-PR) with a straight and neat cut and set the length to be removed and remove the insulation with a straight and neat cut of the power cable.
Cable preparation is essential to the performance and stability of MV-HV cable joints and terminations – if cables are prepared incorrectly using sub-standard tools or basic hand tools then the risk incidence of cable failure is increased.
The following instructions detail how to use the Alroc CWF3/60 insulation removal and stripping tool safely and effectively.
| Cable Tool Part Number | Diameter | Tool Capacity | Dimensions | Packaging | ||||
| Peelable semiconductor thickness capacity | Insulation thickness capacity | Remaining length of the semiconductor | Length | Width | Height | |||
| Alroc CWF3/60 | 16 – 58 mm 0,630 – 2,283 in | Option | 7 mm / 0,276 in | 30-40-45 mm / 1,181-1,575-1,772 in | 305 mm 12,008 in | 115 mm 4,528 in | 165 mm 6,496 in | None |
Alroc Cable Tools 11kV 33kV MV HV
For more than 30 years, ALROC has been engineering, designing and manufacturing cable jointing tools, cable preparation tools and cable fixing solutions to establish the most complete product range in the following areas:
Jointing & Preparation Tools For Cable Jointers & Linesmen Working On MV-HV-EHV Cables
Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage power systems:
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MVÂ
Alroc CWB 18-60 MV HV Cable Jointing Tool
MV HV Medium & High Voltage Cables
The below video shows the Alroc CWB 18-60 cable tools are used by MV-HV jointers to remove the semi-con screen to prepare the cable ready for the installation of joints, terminations or connectors.
The CWB 18-60 cable jointing tool enables the jointer to easily remove the bonded semi-conductor with a chamfer on the transition, leaving a very smooth finish over the insulation prior to installing heat shrink/cold shrink joints, terminations or connectors onto MV HV cables – bonded conductor shields are semi-conducting thermosetting materials firmly bonded to the overlaying insulation.
The following instructions detail how to use the Alroc CWB 18-60 semicon insulation removal and stripping tool safely and effectively.
| Cable Tool Part Number | Diameter | Tool Capacity | Dimensions | Packaging | ||||
| Thickness capacity | Angle of the chamfer on the semiconductor | Remaining length of the semiconductor | Length | Width | Height | |||
| Alroc CWB 18-60 | 18 – 60 mm 0,709 – 2,362 in | 1,1 mm / 0,043 in | 8° | 25-30-40 mm / 0,984-1,181-1,575 in | 235 mm 9,252 in | 125 mm 4,921 in | 90 mm 3,543 in | None |
| Alroc CWB 18-60-FEP | 18 – 60 mm 0,709 – 2,362 in | 1,8 mm / 0,071 in | 13° | 25-30-40 mm / 0,984-1,181-1,575 in | 235 mm 9,252 in | 125 mm 4,921 in | 90 mm 3,543 in | None |
Alroc Cable Tools 11kV 33kV MV HV
For more than 30 years, ALROC has been engineering, designing and manufacturing cable jointing tools, cable preparation tools and cable fixing solutions to establish the most complete product range in the following areas:
Jointing & Preparation Tools For Cable Jointers & Linesmen Working On MV-HV-EHV Cables
Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage power systems:
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MVÂ
MV HV Medium & High Voltage Cables
The below video shows the Alroc BSC-25-40 cable tools used by MV-HV jointers to remove the semi-con screen to prepare the cable ready for the installation of joints, terminations or connectors.
Cable preparation is essential to the performance and stability of MV-HV cable joints and terminations – if cables are prepared incorrectly using sub-standard tools or basic hand tools then the risk incidence of cable failure is increased.
The BSC-25-40 cable tools manufactured by Alroc enable the cable jointer to remove bonded semicon from MV cables and are predominantly used by MV-HV cable jointers.
The following instructions detail how to use the BSC-25-40 insulation removal and stripping tool safely and effectively.
Alroc Cable Tools 11kV 33kV MV HV
For more than 30 years, ALROC has been engineering, designing and manufacturing cable jointing tools, cable preparation tools and cable fixing solutions to establish the most complete product range in the following areas:
Jointing & Preparation Tools For Cable Jointers & Linesmen Working On MV-HV-EHV Cables
Thorne & Derrick are national distributors of LV, MV & HV Cable Installation, Jointing, Substation & Electrical Equipment – servicing businesses involved in cabling, jointing, substation, earthing, overhead line and electrical construction at LV, 11kV, 33kV, 66kV and EHV. Supplying a complete range of power cable accessories to support the installation and maintenance of low/medium and high voltage power systems:
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MVÂ
Thone & Derrick | Sudkabel Approved Distributor | Joints, Terminations & Connectors | Specification & Supply
Scaffolding by Lyndon SGB | The largest specialist scaffolding contractor in the UK providing temporary structures for substation sealing end works for over 40 years.
GCS Jointing is a trading name of Global Cabling Services Ltd and was founded in 2015 when Richard Mason (Director GCS Jointing – Global Cabling Services Ltd), decided to leave a major power utilities contractor after many years of quality service. Richard is an EHV Jointer with over 25 years of experience – with a practical approach to HV EHV projects the work GCS undertake is often installed and supervised on site by Richard personally. GCS Jointing is recognised as a specialist HV and EHV Cable Jointing and Cable Installation Sub-Contractor within the onshore and offshore utilities, oil-gas and clean energy industries.
The company is a family run business.
Contact GCS 01740 630694.
Project Portfolio
Thorne & Derrick are Specialist Distributors to the UK and international Offshore Wind & Renewable industry to provide safe and reliable LV HV Electrical Cable & Power Distribution Systems up to 66kV – we are highly customer responsive and absolutely committed to providing a world-class service.
Contact our UK Power Team for competitive quotations, fast delivery from stock and technical support or training on all LV-HV products.
Key Product Categories: Duct Seals | Cable Cleats | Cable Glands | Electrical Safety | Arc Flash Protection | Cable Jointing Tools | Cable Pulling | Earthing | Feeder Pillars | Cable Joints LV | Joints & Terminations MV HVÂ
See how T&D support, supply and service the Renewable Energy industry.
MV HV Cables 11kV 33kV 66kV | Cable Joints, Terminations & Connections
Published 18 Mar 2026
INDUSTRIAL LABEL PRINTING SOLUTIONS When clear, durable and professional identification is required across control panels, cable systems, production facilities and industrial installations, print quality, reliability and ease of use are critical. Cembre industrial label printers are designed to support...
Published 18 Mar 2026
HIGH VOLTAGE JUNCTION BOXES & ENCLOSURES When high-voltage power distribution and cable termination are required, safety, enclosure integrity and long-term reliability are critical. HV Junction Boxes and Electrical Enclosures manufactured by Abtech are engineered for the safe distribution, cable termination and protection...
